Effects of heat treatment on properties of ITO films prepared by rf magnetron sputtering

Indium tin oxide (ITO) films were deposited on glass substrates by rf magnetron sputtering using a ceramic target (In₂O₃-SnO₂, 90-10 wt%) without extra heating. The post annealing was done in air and in vacuum, respectively. The effects of annealing on the structure, surface morphology, optical and electrical properties of the ITO films were studied. The results show that the increase of the annealing temperature improves the crystallinity of the films, increases the surface roughness, and improves the optical and electrical properties. The transmittance of the films in visible region is increased over 90% after the annealing process in air or in vacuum. The resistivity of the films deposited is about 8.125×10⁻⁴ Ω cm and falls down to 2.34×10⁻⁴ Ω cm as the annealing temperature is increased to 500°C in vacuum. Compared with the results of the ITO films annealed in air, the properties of the films annealed in vacuum is better.