| FTSC薄板坯连铸结晶器流场数值模拟 |
| |
| 引用本文： | 冯慧霄,艾立群,曹晓明,杨晓江. FTSC薄板坯连铸结晶器流场数值模拟[J]. 中国冶金, 2006, 16(5): 36-40 |
| |
| 作者姓名： | 冯慧霄 艾立群 曹晓明 杨晓江 |
| |
| 作者单位： | 1. 河北理工大学冶金与能源学院,河北,唐山,063009
2. 唐山钢铁公司第一炼钢厂,河北,唐山,063016 |
| |
| 摘 要： | 利用商业软件GAMBIT和FLUENT，针对FTSC薄板坯连铸结晶器，建立三维有限体积模型，用来描述结晶器内钢液流动特征。在此基础上，分析了浸入深度、拉坯速度以及水口倾角等参数对结晶器流场的影响，为FTSC薄板坯连铸结晶器相适应的浸入式水口结构尺寸优化提供参考。
|
| 关 键 词： | 薄板坯连铸 结晶器 流场 数值模拟 |
| 文章编号： | 1006-9356（2006）05-0036-05 |
| 收稿时间： | 2006-02-16 |
Mathematical Modelling of Flow Field in FTSC Continuous Casting Mold |
| |
| FENG Hui-xiao,AI li-qun,CAO Xiao-ming,YANG Xiao-jiang. Mathematical Modelling of Flow Field in FTSC Continuous Casting Mold[J]. China Metallurgy, 2006, 16(5): 36-40 |
| |
| Authors: | FENG Hui-xiao AI li-qun CAO Xiao-ming YANG Xiao-jiang |
| |
| Affiliation: | 1. School of Metallurgy and Energy, Hebei Polytechnic University, Tangshan 063009, Hebei,China;2. No. 1 Steelworks, Tangshan Iron and Steel Company, Tangshan 063016 ,Hebei,China |
| |
| Abstract: | A three-dimensional finite-volume model to describe the contour of fluid flow in the mold of FTSC thin slab continuous casting was formulated using the commercial code GAMBIT and FLUENT. On the basis above, the influence of such as immersion depth of nozzle, casting speed and angle of the nozzle port on flow field in the mold are analyzed and Reasonable parameters of structure and dimension for submerged nozzle used in the FTSC thin slab continuous casting mold are suggested. |
| |
| Keywords: | thin slab continuous casting mold flow field mathematical modelling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
