| 1Cr18Ni9Ti的TIG焊接头的电弧表面改性 |
| |
| 引用本文： | 王琪相 罗伟. 1Cr18Ni9Ti的TIG焊接头的电弧表面改性[J]. 焊接, 1999, 0(10): 17-20 |
| |
| 作者姓名： | 王琪相 罗伟 |
| |
| 作者单位： | [1]杭州制氧机集团公司 [2]浙江大学 |
| |
| 摘 要： | 开展了微束等离子弧对焊接接头的表面改性改性研究。采用４Ａ微束等离子弧对１Ｃｒ１８Ｎｉ９ＴｉＲＴ Ａ ＱＱＮＧＳＥ ＲＮＧＧＸＲＣ ＯＪＦ ＯＪＦ ＲＵＶ ＲＵＶ ＵＤＩ ＦＪＴＦＧＥ ＤＭ ＲＶ ＲＡＬ ＴＧＪ ＯＰＷＫ，ＣＭＰＷＷＶＳＲＢ ＹＡＡ ＳＵ ＪＯ ＴＭＧ ＸＥＸＫ，
|
| 关 键 词： | 焊接接头 腐蚀 表面改性 TIG焊 不锈钢 |
EFFECT OF MICRO - PLASMA ARC SURFACE REMELTING ON THE CORROSION RESISTANCE OF 1Cr18Ni9Ti TIG WELDING JOINT |
| |
| Hangzhou Oxygen Plant Manufactory Wang Qiming Zhejiang University Luo Wei. EFFECT OF MICRO - PLASMA ARC SURFACE REMELTING ON THE CORROSION RESISTANCE OF 1Cr18Ni9Ti TIG WELDING JOINT[J]. Welding & Joining, 1999, 0(10): 17-20 |
| |
| Authors: | Hangzhou Oxygen Plant Manufactory Wang Qiming Zhejiang University Luo Wei |
| |
| Affiliation: | Hangzhou Oxygen Plant Manufactory Wang Qiming Zhejiang University Luo Wei |
| |
| Abstract: | Surface modification using micro - plasma arc on the welded joint was conducted in the paper. With 4 A micro -plasma arc, the surface of the 1Cr18Ni9Ti tungsten inert- gas (TIG) arc welded joint was scanned by the multipass method.The microstructure was observed using SEM. The polarization curves both with and without remelting were plotted in 1M H2SO4 solution. It was found that after remelting, the microstructure was refined and the microsegregation was eliminated. As a result, the corrosion resistance of the joint was significantly improved. |
| |
| Keywords: | 1Cr18Ni9Ti welded joint corrosion surface modification |
| 本文献已被 CNKI 维普 等数据库收录！ |
