| 喷漆机器人尺寸优化设计及控制系统总体规划 |
| |
| 引用本文： | 梅江平,杨志永,张大卫.喷漆机器人尺寸优化设计及控制系统总体规划[J].组合机床与自动化加工技术,2004(10):62-64. |
| |
| 作者姓名： | 梅江平 杨志永 张大卫 |
| |
| 作者单位： | 天津大学,机械工程学院,天津,300072 |
| |
| 摘 要： | 针对某发动机进气管道长且截面复杂等特点,设计一喷漆机器人对其喷底漆,面漆和中涂漆.文章首先通过灵活度分析确定出操作手的尺寸,进而通过动力学分析给出各关节驱动电机输出扭矩,并据此设计出该机器人各参数.采用双CPU的PC PMAC结构,以Windows为软件平台建造出样机的开放式实时数控系统,主要研究了喷漆机器人的总体方案布局,硬件平台建造技术及插补算法的实施策略.
|
| 关 键 词： | 喷漆机器人 尺寸优化 NC系统 |
| 文章编号： | 1001-2265(2004)10-0062-04 |
| 修稿时间： | 2004年3月18日 |
Optimized dimension design and NC scheme layout of painting robot |
| |
| MEI Jiangping,YANG Zhiyong,ZHANG Dawei.Optimized dimension design and NC scheme layout of painting robot[J].Modular Machine Tool & Automatic Manufacturing Technique,2004(10):62-64. |
| |
| Authors: | MEI Jiangping YANG Zhiyong ZHANG Dawei |
| |
| Affiliation: | MEI Jiangping YANG Zhiyong ZHANG Dawei |
| |
| Abstract: | Aimed at some characteristics of one gas conduit of generator, design one robot to spray painting, give the dimension in terms of the analysis of global dexterity, and the output torque of joint by the analysis of dynamics first. This paper also deals with the technique that the open architecture technique is used in the NC system development with PC PMAC and Windows as the hardware and software platforms. The contents include the whole scheme layout, hardware construct and interpolation strategy. |
| |
| Keywords: | Painting robot Optimized dimension design NC system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
