| 基于SolidWorks的数控回转立体库的参数化设计 |
| |
| 引用本文： | 季忠,刘韧,王晓丽,刘文亮,杨丹丹,王文娟. 基于SolidWorks的数控回转立体库的参数化设计[J]. 包装工程, 2009, 30(10) |
| |
| 作者姓名： | 季忠 刘韧 王晓丽 刘文亮 杨丹丹 王文娟 |
| |
| 作者单位： | 山东大学,济南,250061;山东大学,济南,250061;山东大学,济南,250061;山东大学,济南,250061;山东大学,济南,250061;山东大学,济南,250061 |
| |
| 摘 要： | 为了提高回转立体库的设计效率,在SolidWorks平台上,根据现有型号的回转立体库,建立其零件和装配体的标准模型作为设计模板,而后进行参数驱动,通过VB.NET开发了回转立体库参数化设计系统。介绍了该系统的整体构架,并通过具体实例,介绍了参数化设计的实现过程。
|
| 关 键 词： | 回转立体库 参数化设计 SolidWorks 二次开发 |
Parametric Design of Digital Control Autogiration Cabinet Based on Solidworks |
| |
| JI Zhong,LIU Ren,WANG Xiao-li,LIU Wen-liang,YANG Dan-dan,WANG Wen-juan. Parametric Design of Digital Control Autogiration Cabinet Based on Solidworks[J]. Packaging Engineering, 2009, 30(10) |
| |
| Authors: | JI Zhong LIU Ren WANG Xiao-li LIU Wen-liang YANG Dan-dan WANG Wen-juan |
| |
| Affiliation: | JI Zhong,LIU Ren,WANG Xiao-li,LIU Wen-liang,YANG Dan-dan,WANG Wen-juan(Sh,ong University,Jinan 250061,China) |
| |
| Abstract: | In order to improve the design efficiency of autogiration cabinet,standard templates of the parts and assemblies on SolidWorks were built according to the existing types of autogiration cabinet,and then the autogiration cabinet parameterized design system was developed by using VB.NET in parameter driving method.The whole framework of the system was introduced.The design process and results were shown with specific examples. |
| |
| Keywords: | autogiration cabinet parametric design SolidWorks secondary development |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
