| 一种降低OFDM系统PAPR的改进限幅噪声压缩方法 |
| |
| 引用本文： | 丁亚青,吕建鸿,王中鹏. 一种降低OFDM系统PAPR的改进限幅噪声压缩方法[J]. 电讯技术, 2022, 62(11) |
| |
| 作者姓名： | 丁亚青 吕建鸿 王中鹏 |
| |
| 作者单位： | 浙江科技学院 信息与电子工程学院 |
| |
| 基金项目： | 浙江省自然科学基金重点项目(LZ21F010001) |
| |
| 摘 要： | 为降低正交频分复用(Orthogonal Frequency Division Multip lexing,OFDM)系统峰均功率比(Peak to Average Power Ratio,PAPR)，在最近提出的限幅噪声压缩(Clipping noise Compression,CNC)方法基础上，提出了一种基于改进的艾里压缩函数来抑制限幅噪声的方法(CNC Improved Airy Function,CNC IAF)。改进的艾里压缩函数形式简单，计算复杂度较小，并且对归一化限幅噪声的取值条件没有CNC方法的严格。仿真结果表明，CNC IAF方法能够抑制OFDM信号的PAPR同时有效地降低系统误码率，性能比CNC方法均有改善。
|
| 关 键 词： | 正交频分复用；峰均功率比抑制；限幅噪声压缩；艾里函数 |
An improved clipping-noise compression method for reducing PAPR of OFDM systems |
| |
| DING Yaqing,LYU Jianhong,WANG Zhongpeng. An improved clipping-noise compression method for reducing PAPR of OFDM systems[J]. Telecommunication Engineering, 2022, 62(11) |
| |
| Authors: | DING Yaqing LYU Jianhong WANG Zhongpeng |
| |
| Affiliation: | School of Information and Electronic Engineering,Zhejiang University of Science and Technology |
| |
| Abstract: | In order to reduce the peak to average power ratio(PAPR) of orthogonal frequency division multiplexing(OFDM) signal and according to the recently proposed clipping noise compression(CNC) method,a clipping noise compression method based on improved Airy function(CNC IAF) is proposed.The improved Airy compression function has the advantages of simple form and low computational complexity,and it is not as strict as CNC method on the value condition of normalized clipping noise.Simulation results show that the CNC IAF method can reduce PAPR and bit error rate of OFDM system while having better performances than the CNC method. |
| |
| Keywords: | OFDM PAPR suppression clipping noise compression Airy function |
|
| 点击此处可从《电讯技术》浏览原始摘要信息 |
|
点击此处可从《电讯技术》下载全文 |
