| 基于AutoCAD的加工中心在线工件自动检测系统 |
| |
| 引用本文： | 桑宏强,刘丽冰,刘芬.基于AutoCAD的加工中心在线工件自动检测系统[J].机床与液压,2007,35(5):190-191. |
| |
| 作者姓名： | 桑宏强 刘丽冰 刘芬 |
| |
| 作者单位： | 天津工业大学机电学院,天津,300160;河北工业大学机械学院,天津,300130 |
| |
| 摘 要： | 介绍了基于AutoCAD的加工中心在线工件自动检测系统的构成及功能.在ObjectARX的开发环境Visual C 6.0下,对AutoCAD二次开发提取检测数据,制定检测工艺规划,自动生成检测程序.该系统可用于工件的装夹找正,对工件进行自动在线测量、数据处理及质量分析,并能对加工误差进行补偿,以提高加工精度.
|
| 关 键 词： | ObjectARX 在线检测 检测工艺规划 自动编程 |
| 文章编号： | 1001-3881(2007)5-190-2 |
| 修稿时间： | 2006-05-29 |
Automatic Inspecting System for Workpiece on Machining Center Based on AutoCAD |
| |
| SANG Hongqiang,LIU Libing,LIU Fen.Automatic Inspecting System for Workpiece on Machining Center Based on AutoCAD[J].Machine Tool & Hydraulics,2007,35(5):190-191. |
| |
| Authors: | SANG Hongqiang LIU Libing LIU Fen |
| |
| Affiliation: | 1. School of Mechanical and Electronic Engineering, Tianjin Polytechnic University, Tianjin 300160, China; 2. Schol of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China |
| |
| Abstract: | The composing and functions of an automatic inspecting system for workpiece on machining center based on AutoCAD were introduced.In the Visual C 6.0 environment of the ObjectARX,inspecting datum were obtained by secondary development of AutoCAD,inspecting process planning was laid up,inspecting program was made automatically.The inspecting system can be applied to automatic workpiece setting up,on-line inspection of workpiece,data processing,quality analysis and compensation of machined workpiece errors,which leads to enhancement of precision. |
| |
| Keywords: | ObjectARX On-line inspection Inspecting process planning Automatic programming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
