| 基于操作与精铸模特征的工艺规程设计 |
| |
| 引用本文： | 汪文虎,杨应昌,张军,隽英昌.基于操作与精铸模特征的工艺规程设计[J].机床与液压,2007,35(10):22-24. |
| |
| 作者姓名： | 汪文虎 杨应昌 张军 隽英昌 |
| |
| 作者单位： | 西北工业大学现代设计与集成制造技术教育部重点实验室,西安,710072 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)
,
科技支撑计划 |
| |
| 摘 要： | 根据精铸模零件的特点,采用基于精铸模特征与操作的设计思想,为精铸模零件典型特征建立数据库,将专家经验知识化,开发了涡轮叶片精铸模具工艺规程设计系统,使用该系统,缩短了精铸模工艺规划周期,增强了模具产品的经济时效性.
|
| 关 键 词： | 特征 精铸模 操作 工艺规程设计 操作 精铸模具 典型特征 工艺规划 规程设计 Operation Feature Based Turbine Blade Mould Casting Refined 时效性 经济 模具产品 增强 周期 设计系统 使用 工艺规程 |
| 文章编号： | 1001-3881（2007）10-022-3 |
| 修稿时间： | 2006-11-03 |
The Process Planning of Refined Casting Mould to Turbine Blade Based on Feature and Operation |
| |
| WANG Wenhu,YANG Yingchang,ZHANG Jun,JUAN Yingchang.The Process Planning of Refined Casting Mould to Turbine Blade Based on Feature and Operation[J].Machine Tool & Hydraulics,2007,35(10):22-24. |
| |
| Authors: | WANG Wenhu YANG Yingchang ZHANG Jun JUAN Yingchang |
| |
| Abstract: | According to the characteristics of the parts of refined casting mould, the feature database for refined casting mould was established based on the design ideas of the feature and operation of refined casting mould, the design system of the process planning of refine casting mode to turbine blade was developed by using expert system to translate experience into knowledge. The system can enhance efficiency and shorten developing cycle of refined casting mould. |
| |
| Keywords: | Feature Refined casting mould Operation Process planning design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
