| 螺旋锥齿轮离散齿面数字仿真加工方法研究 |
| |
| 引用本文： | 王延忠,阮德林,赵兴福,聂俊峰,李卫兵. 螺旋锥齿轮离散齿面数字仿真加工方法研究[J]. 机床与液压, 2007, 35(2): 24-26,30 |
| |
| 作者姓名： | 王延忠 阮德林 赵兴福 聂俊峰 李卫兵 |
| |
| 作者单位： | 北京航空航天大学机械学院,北京,100083;哈尔滨航空工业(集团)有限公司,哈尔滨,150066;天津机电职业技术学院,天津,300161 |
| |
| 基金项目： | 国家自然科学基金 , 航空科研项目 |
| |
| 摘 要： | 基于螺旋锥齿轮HFT加工方法,建立了螺旋锥齿轮的仿真加工模型,通过编制仿真加工程序,获取了螺旋锥齿轮齿面离散点,在此基础上实现了螺旋锥齿轮齿面的NURBS表示,并通过实例验证了该方法的可行性.
|
| 关 键 词： | 螺旋锥齿轮 仿真 离散 NURBS 拟合齿面 |
| 文章编号： | 1001-3881（2007）2-024-3 |
| 修稿时间： | 2005-12-20 |
Study on Digital Simulation Machining Technology of Spiral Bevel Gear's Discrete Surface |
| |
| WANG Yanzhong,RUAN Delin,ZHAO Xingfu,NIE Junfeng,LI Weibing. Study on Digital Simulation Machining Technology of Spiral Bevel Gear's Discrete Surface[J]. Machine Tool & Hydraulics, 2007, 35(2): 24-26,30 |
| |
| Authors: | WANG Yanzhong RUAN Delin ZHAO Xingfu NIE Junfeng LI Weibing |
| |
| Affiliation: | 1. Department of Mechanical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China; 2. Harbin Aviation Industry (Group |
| |
| Abstract: | Based on the HFT machining technique of spiral bevel gear, a simulation model was established and a series of discrete points were obtained through compiling emulator.According to the method, a mathematical model of the tooth surface was established by non-uniform rational B-spline (NURBS), which was validated by an example. |
| |
| Keywords: | Spiral bevel gear Simulation Discrete Non- uniform rational B- spline Fitting surface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
