| PRS-XY型混联数控机床系统软件开发 |
| |
| 引用本文： | 孙宏昌,张建民,牛志刚,周宏斌,贾东永.PRS-XY型混联数控机床系统软件开发[J].机床与液压,2007,35(1):33-35. |
| |
| 作者姓名： | 孙宏昌 张建民 牛志刚 周宏斌 贾东永 |
| |
| 作者单位： | 天津工程师范学院,天津,300222;北京理工大学,北京,100081;北京理工大学,北京,100081 |
| |
| 基金项目： | 高等学校博士学科点专项科研项目
,
北京市重点学科建设项目 |
| |
| 摘 要： | 结合PRS-XY型混联机床结构特点,采用以"PC Turbo PMAC"为硬件平台,以Windows XP操作系统为软件平台,构建了开放式混联数控系统的总体方案;并介绍了数控系统控制结构和系统软件各模块的设计.通过本软件成功构建了一种混联数控机床的控制体系,可以实现与普通数控机床相同的加工功能及机床控制功能,且控制可靠,运行良好.
|
| 关 键 词： | 混联数控机床 开放式结构 Turbo PMAC |
| 文章编号： | 1001-3881(2007)1-033-3 |
| 修稿时间： | 2005-12-14 |
Development of CNC System Software for PRS-XY Hybrid Machining Tool |
| |
| SUN Hongchang,ZHANG Jianmin,NIU Zhigang,ZHOU Hongbin,JIA Dongyong.Development of CNC System Software for PRS-XY Hybrid Machining Tool[J].Machine Tool & Hydraulics,2007,35(1):33-35. |
| |
| Authors: | SUN Hongchang ZHANG Jianmin NIU Zhigang ZHOU Hongbin JIA Dongyong |
| |
| Affiliation: | 1. Tianjin University of Technology and Education, Tianjin 300222, China; 2. Beijing Institute of Technology, Beijing 100081, China |
| |
| Abstract: | Based on the architectural characteristics of the hybrid machine tool under consideration,the open architecture technique was used in the CNC system development with "PC Turbo PMAC" and Windows XP as the hardware and software platforms.The system software was developed by using modular concept.Through this software,the control system of Hybrid Machining Tool was built successfully.The function of manufacture and machine-control was implemented as well as the ordinary machine tool.The control software is reliable and works well. |
| |
| Keywords: | Hybrid NC machine tool Open architecture Turbo PMAC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
