首页 | 本学科首页   官方微博 | 高级检索  
     

一种测量任意链路可用带宽的方法
引用本文:何莉,余顺争. 一种测量任意链路可用带宽的方法[J]. 软件学报, 2009, 20(4): 997-1013. DOI: 10.3724/SP.J.1001.2009.03306
作者姓名:何莉  余顺争
作者单位:中山大学,电子与通信工程系,广东,广州,510275;中山大学,电子与通信工程系,广东,广州,510275
基金项目:Supported by the National High-Tech Research and Development Plan of China under Grant No.2006AA01Z143 (国家高技术研究发展计划(863)); the Key Program of NSFC-Guangdong Joint Funds of China under Grant No.U0735002 (国家自然科学基金-广东联合基金重点项目)
摘    要:可用带宽测量对于网络行为分析、网络服务质量(quality of service,简称QoS)的验证等有很重要的作用.现有可用带宽测量工作主要集中在端到端路径可用带宽测量,仅提供路径上承压链路(tight link)的信息,而不能提供其他关键链路的信息.为此,提出一种新颖的链路可用带宽测量算法LinkPPQ(trains of pairs of packet-quartets used to measure available bandwidth of arbitrary links),它采用由四探测分组结构对构成的探测序列,能够测量网络中任意链路的可用带宽,并跟踪该链路上背景流的变化.在仿真环境和实际网络环境下研究了LinkPPQ 的性能.仿真结果表明,在几种不同背景流场景下,对于具有单狭窄链路的路径和具有多狭窄链路的路径,LinkPPQ 都能够对各个链路的可用带宽进行有效的测量.绝大多数情况下测量误差小于30%,且具有较好的测量平稳性.实验网的实验结果也表明,LinkPPQ 可以准确测量以下几种情况下的链路的可用带宽:a) 从容量为10Mbps 的链路准确地测量一条100Mbps 链路的可用带宽;b) 准确测量容量10 倍于紧邻其后狭窄链路的容量的链路的可用带宽;c) 准确测量具有多狭窄链路的路径上各狭窄链路的可用带宽.

关 键 词:链路可用带宽  主动探测  网络监控  因特网测量  性能估计
收稿时间:2007-12-15
修稿时间:2008-02-27

Methodology for Measuring Available Bandwidth on Arbitrary Links
HE Li and YU Shun-Zheng. Methodology for Measuring Available Bandwidth on Arbitrary Links[J]. Journal of Software, 2009, 20(4): 997-1013. DOI: 10.3724/SP.J.1001.2009.03306
Authors:HE Li and YU Shun-Zheng
Affiliation:Department of Electronics and Communication Engineering;SUN YAT-SEN University;Guangzhou 510275;China
Abstract:The available bandwidth measurement is important for many Internet applications, such as networkbehavior analysis, quality of service (QoS) verification, and so on. Existing available bandwidth measurement toolsmainly measure the available bandwidth for a whole network path, and provide information about the tight link(s)other than vital links. Therefore, this paper presents a novel algorithm called LinkPPQ (trains of pairs of packet-quartets used to measure available bandwidth of arbitrary links), which uses trains of pairs of packet-quartets to measure the available bandwidth of any link along the path, and track the variety of the cross-traffic on it. This paper studies the performance of LinkPPQ in both simulation circumstances and the laboratorial network.Simulation results show that LinkPPQ can accurately measure the available bandwidth of each link on the paths thathave one narrow link or multiple narrow links, under different cross-traffic loads. Most measurement errors are under 30%, and the results are stable. The laboratorial experimental results show that LinkPPQ can accuratelymeasure the available bandwidth in the following situations: a) measuring a link with capacity 100Mbps from a link with capacity 10Mbps; b) monitoring the link with capacity that is ten times of the narrow link next to it on the path;c) estimating the available bandwidth of the narrow links on a path having multiple narrow links.
Keywords:link available bandwidth   active probing   network monitoring   Internet measurement   performanceevaluation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《软件学报》浏览原始摘要信息
点击此处可从《软件学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号