| 基于Internet技术的新型模具CAD/CAM系统研究 |
| |
| 引用本文： | 李东波,唐敦兵,张世琪.基于Internet技术的新型模具CAD/CAM系统研究[J].锻压技术,1999,24(5):57-59. |
| |
| 作者姓名： | 李东波 唐敦兵 张世琪 |
| |
| 作者单位： | 南京理工大学制造工程学院,210094 |
| |
| 摘 要： | 分析了ＷＷＷ的三层结构及ＣＧＩ工作原理,提出了利用Ｉｎｔｅｒｎｅｔ技术建立模具模拟公司,建立了基于Ｉｎｔｅｒｎｅｔ的模具ＣＡＤ／ＣＡＭ系统框架,并以拉深工艺中拉深系数的远程求解为例,分析了这种新型模具ＣＡＤ／ＣＡＭ系统的建立和实施过程,为模具敏捷制造的实现提供了一条新的思路。
|
| 关 键 词： | Internet 模具 CAD CAM 公共网关接口 |
Researches on new die & mould CAD/CAM system based on internet technology |
| |
| Li Dongbo,Tang Dunbing,Zhang Shiqi.Researches on new die & mould CAD/CAM system based on internet technology[J].Forging & Stamping Technology,1999,24(5):57-59. |
| |
| Authors: | Li Dongbo Tang Dunbing Zhang Shiqi |
| |
| Affiliation: | Nanjian University of Science & Technology Li Dongbo Tang Dunbing Zhang Shiqi |
| |
| Abstract: | The three\|layer structure of WWW and the working principle of CGI are interpreted in this paper.A kind of new thought,that a virtual die & mould company can be built up based on Internet has been put forward.And then the frame of a new die & mould CAD/CAM system on Internet technology is created.Furthermore,the long\|distance acquiring drawing coefficient in drawing process is taken as an example to illustrate this new die & mould CAD/CAM system based on Internet.In a word,This new die & mould CAD/CAM system based on Internet technology can help the realization of agile manufacturing in die & mould company. |
| |
| Keywords: | Internet Die & Mould CAD/CAM CGI HTTPct ductility was obviously increased and other mechanical properties were decreased after modification with HDPE and EPDM But the loss of the mechanical properties could be made up through reinforcement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
