| 多层波纹管柱屈曲稳定性非线性有限元分析 |
| |
| 引用本文： | 王建军,王帅,李楚林,于长波. 多层波纹管柱屈曲稳定性非线性有限元分析[J]. 压力容器, 2007, 24(11): 14-17 |
| |
| 作者姓名： | 王建军 王帅 李楚林 于长波 |
| |
| 作者单位： | 1. 北京航空航天大学,能源与动力工程学院,北京,100083
2. 中国运载火箭技术研究院十一研究所,北京,100076 |
| |
| 摘 要： | 多层多波波纹管柱屈曲性有限元分析模型规模大、非线性问题突出，不易于收敛。为此，文中给出了一种等效厚度模拟方法，建立了等效单层波纹管有限元模型，并在此基础上进行了波纹管的柱屈曲分析，得到了波纹管的屈曲载荷和屈曲模态。文中的工作为这类多层多波大型波纹管的柱屈曲稳定性分析提供了一种有效方法，分析结果也对该类波纹管的设计有较重要的参考价值。
|
| 关 键 词： | 多层波纹管 等效厚度模拟,非线性有限元 柱屈曲 |
| 文章编号： | 1001-4837（2007）11-0014-04 |
| 收稿时间： | 2007-09-04 |
| 修稿时间： | 2007-09-04 |
Nonlinear Finite Element Analysis of Column Squirm Stability for Multilayer Bellows |
| |
| WANG Jian-jun,WANG Shuai,LI Chu-lin,YU Chang-bo. Nonlinear Finite Element Analysis of Column Squirm Stability for Multilayer Bellows[J]. Pressure Vessel Technology, 2007, 24(11): 14-17 |
| |
| Authors: | WANG Jian-jun WANG Shuai LI Chu-lin YU Chang-bo |
| |
| Abstract: | The finite element(FE) model of the multilayer bellows has considerable degrees of freedom and obvious nonlinear phenomenon; therefore it has great difficulty in computational convergence.In the presented paper,an equivalent thickness simulation method is proposed to solve the computational problems.The FE model of equivalent single-layer bellows is established.Based on the model,the column squirm features is analyzed,and the buckling mode and buckling critical loading is obtained.The research works in this paper provide an effective method for the column squirm stability analysis of multilayer,multiwave bellows,and the results are helpful to design the bellows. |
| |
| Keywords: | muhilayer bellows equivalent thickness simulation nonlinear finite element column squirm |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
