| 丁腈橡胶发泡涂料的制备工艺 |
| |
| 引用本文： | 王秀猛,邱祖民,郑楠.丁腈橡胶发泡涂料的制备工艺[J].南昌大学学报(工科版),2013(4):317-322. |
| |
| 作者姓名： | 王秀猛 邱祖民 郑楠 |
| |
| 作者单位： | 南昌大学环境与化学工程学院,江西南昌330031 |
| |
| 基金项目： | 江西省自然科学基金资助项目（20122BAB203021）;江西省科技攻关项目（20111BBE50021,20122BBE50036）. |
| |
| 摘 要： | 采用液态法施工自由发泡工艺，对不同发泡剂份数、2段加热温度和时间5个影响因素进行正交试验，对制得样品的性能和泡孔结构进行测试并加权处理，得到对应的综合性能。通过对各种性能的直观分析获取其主要影响因素和最佳条件。结果表明：在发泡剂15phr、第1段130％／30min、第2段170℃／40min时发泡涂料的综合性能最好。
|
| 关 键 词： | 发泡橡胶 正交实验 涂料 制备 |
Preparation processes of NBR foam coating |
| |
| WANG Xiumeng,QIU Zumin,ZHENG Nan.Preparation processes of NBR foam coating[J].Journal of Nanchang University(Engineering & Technology Edition),2013(4):317-322. |
| |
| Authors: | WANG Xiumeng QIU Zumin ZHENG Nan |
| |
| Affiliation: | (School of Environmental and Chemical Engineering, Nanchang University, Nanchang 330031, China) |
| |
| Abstract: | The free foaming process and liquid method of construction was applied to prepare the samples. The mechanical properties and cell structure of the resulting samples at different copies of blowing agents, temperature and time of segments were tested by orthogonal experiment. The corresponding overall performance could be evalua- ted by weighting the test results, and the main factors and optimal conditions of various properties could be got by intuitive analysis. The final results showed that foam rubber has the best overall performance at 15 phr foaming a- gent,first 130 ℃/30 rain,second 170 ℃/40 min. |
| |
| Keywords: | foam rubber orthogonal method coating preparation |
| 本文献已被 维普 等数据库收录！ |
