首页 | 本学科首页   官方微博 | 高级检索  
     

XCP调频波脉冲计数鉴频系统的FPGA实现
引用本文:贾志成,郭丽娟,李永军,陈雷. XCP调频波脉冲计数鉴频系统的FPGA实现[J]. 自动化与仪表, 2010, 25(1): 6-9
作者姓名:贾志成  郭丽娟  李永军  陈雷
作者单位:1. 河北工业大学,信息工程学院,天津,300401
2. 国家海洋技术中心,天津,300112
3. 天津商业大学信息工程学院,天津,300134
基金项目:国家高技术研究发展计划(863计划) 
摘    要:为提高XCP中三路调频信号鉴频解调的抗干扰性能,采用脉冲计数式鉴频解调法,鉴频中采用倍频技术,提高了鉴频灵敏度。由参考信号发生器产生正交CQR和同相CIR两个参考信号.利用这两个相互正交的同步信号,并行控制多路脉冲计数器实施数字鉴频。采用现场可编程逻辑门阵列FPGA进行鉴频器硬件电路设计来降低系统复杂度并提高系统稳定性。测试结果表明,系统完全满足精度及可靠性等方面要求。

关 键 词:投弃式海流剖面测量仪  鉴频  脉冲计数  调制信号  现场可编程逻辑门阵列

Realization of FM Pulse Counting Discrimination System Based on FPGA in XCP
JIA Zhi-cheng,GUO Li-juan,LI Yong-jun,CHEN Lei. Realization of FM Pulse Counting Discrimination System Based on FPGA in XCP[J]. Automation and Instrumentation, 2010, 25(1): 6-9
Authors:JIA Zhi-cheng  GUO Li-juan  LI Yong-jun  CHEN Lei
Affiliation:JIA Zhi-cheng1,GUO Li-juan1,LI Yong-jun2,CHEN Lei3(1.School of Information Engineering,Hebei University of Technology,Tianjin 300401,China,2.National Ocean Technology Center,Tianjin 300112,3.School of Information Engineering,Tianjin University of Commerce,Tianjin 300134,China)
Abstract:Three XCP FM signals are taken pulse counting discrimination to improve the anti-interference performance in frequency discrimination,while frequency multiplier technology are used to enhance the sensitivity of the frequency.The reference signal generator produce two-phase reference signal CQR and CIR which corresponding to orthogonal and in-phase,then these two simultaneous orthogonal signals are used to control the frequency discrimination implementation of multi-channel pulse counter collaterally.The har...
Keywords:expendable current profiler(XCP)  frequency discrimination  pulse counting  modulation signal  field programmable gate arrays(FPGA)  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号