首页 | 本学科首页   官方微博 | 高级检索  
     

虚拟加工系统运动仿真的研究
引用本文:王玉生,马正元,王迎春,韩立.虚拟加工系统运动仿真的研究[J].沈阳工业大学学报,2004,26(6):619-622.
作者姓名:王玉生  马正元  王迎春  韩立
作者单位:沈阳工业大学,机械工程学院,辽宁,沈阳,110023
摘    要:分析了在虚拟制造中占有重要地位的机械加工过程仿真方法.以HAASVF-1加工中心为例,对虚拟加工系统的运动仿真进行了研究和探讨.利用UG强大的运动分析功能实现了虚拟加工系统的运动仿真.该运动仿真使人们直观感受加工过程,能对加工过程中出现的碰撞和干涉进行检测,并提供报警信息.

关 键 词:虚拟制造  数控加工  运动仿真
文章编号:1000-1646(2004)06-0619-04
修稿时间:2003年9月26日

Research on motion simulation for virtual machining system
WANG Yu-sheng,MA Zheng-yuan,WANG Ying-chun,HAN Li.Research on motion simulation for virtual machining system[J].Journal of Shenyang University of Technology,2004,26(6):619-622.
Authors:WANG Yu-sheng  MA Zheng-yuan  WANG Ying-chun  HAN Li
Abstract:The method of mechanical machining process simulation which is an important part of virtual manufacturing is analyzed.Taking HAAS VF-1 as an example,motion simulation for virtual machining system is researched and discussed.With the powerful motion analysis function of UG,the motion simulation for virtual machining system is realized.The motion simulation gives us intuitionistic recept of machining process.The collision and interference in machining process can be detected,and warning information can be provided.
Keywords:virtual manufacturing  NC machining  motion simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号