首页 | 本学科首页   官方微博 | 高级检索  
     

表面活性素集成生产过程(Ⅲ)吸附柱的模型
引用本文:Ludovic Montastruc,刘涛,Iordan Nikov,Pascal Floquet,Serge Domenech. 表面活性素集成生产过程(Ⅲ)吸附柱的模型[J]. 中国化学工程学报, 2011, 19(3): 357-364
作者姓名:Ludovic Montastruc  刘涛  Iordan Nikov  Pascal Floquet  Serge Domenech
作者单位:1. Laboratoire ProBioGEM EA 1026, Polytech’Lille, USTL, Lille, France;2. Laboratoire de Génie Chimique, Z.A Basso Cambo, 5 rue Paulin Talabot, 31106 Toulouse Cedex 1, France;3. State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
摘    要:The study is focused on modeling of separation process and optimization.An adsorption separation process is simulated.The surfactin production process by Bacillus subtilis ATCC 21332 followed by surfactin adsorption in a fixed-bed column packed with commercial active carbon is studied in laboratory.The adsorption column achieves high surfactin recovery(94%)by up-flow methanol elution at 25°C.The adsorption column is simulated with a complex one-dimensional plug flow dispersion model coupled with nonlinear adsorption equilibrium,based on the assumption that the adsorption of surfactin is monomolecular layer and no micelle is formed.The molecular diffusion coefficient of surfactin in water solution with electric neutrality is estimated to be 0.428×10 -5 cm 2 ·s -1 by molecular dynamics simulation.The model developed can describe the complex interplay of adsorption kinetics,fluid dynamics,and mass-transfer phenomena based on the assumption of no radial temperature and concentration gradients,and is of adequate precision.The work involved in this paper is valuable for the optimization of the production process of surfactin.

关 键 词:surfactant  adsorption  mathematical modelling  kinetics  integrated process  
收稿时间:2010-11-23
修稿时间:2010-11-23 

Integrated process for production of surfactin (III) modeling of adsorption column
L. Montastruc,LIU Tao,I. Nikov,P. Floquet,S. Domenech. Integrated process for production of surfactin (III) modeling of adsorption column[J]. Chinese Journal of Chemical Engineering, 2011, 19(3): 357-364
Authors:L. Montastruc  LIU Tao  I. Nikov  P. Floquet  S. Domenech
Affiliation:1. Laboratoire ProBioGEM EA 1026, Polytech’Lille, USTL, Lille, France;2. Laboratoire de Génie Chimique, Z.A Basso Cambo, 5 rue Paulin Talabot, 31106 Toulouse Cedex 1, France;3. State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Abstract:The study is focused on modeling of separation process and optimization. An adsorption separation process is simulated. The surfactin production process by Bacillus subtilis ATCC 21332 followed by surfactin adsorption in a fixed-bed column packed with commercial active carbon is studied in laboratory. The adsorption column achieves high surfactin recovery (94%) by up-flow methanol elution at 25 °C. The adsorption column is simulated with a complex one-dimensional plug flow dispersion model coupled with nonlinear adsorption equilibrium, based on the assumption that the adsorption of surfactin is monomolecular layer and no mi-celle is formed. The molecular diffusion coefficient of surfactin in water solution with electric neutrality is estimated to be 0.428×105 cm2•s1 by molecular dynamics simulation. The model developed can describe the complex interplay of adsorption kinet-ics, fluid dynamics, and mass-transfer phenomena based on the assumption of no radial temperature and concentration gradients, and is of adequate precision. The work involved in this paper is valuable for the optimization of the production process of surfactin.
Keywords:surfactant  adsorption  mathematical modelling  kinetics  integrated process
本文献已被 CNKI 等数据库收录!
点击此处可从《中国化学工程学报》浏览原始摘要信息
点击此处可从《中国化学工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号