| CLAM钢焊接残余应力与变形的三维数值模拟 |
| |
| 引用本文： | 尹莎,雷玉成,邵奇栋,巨新.CLAM钢焊接残余应力与变形的三维数值模拟[J].焊接技术,2010,39(1). |
| |
| 作者姓名： | 尹莎 雷玉成 邵奇栋 巨新 |
| |
| 作者单位： | 1. 江苏大学,材料科学与工程学院,江苏,镇江,212013
2. 北京科技大学,物理系,北京,100083 |
| |
| 基金项目： | 国家重点基础研究项目[973计划](2008CB717802);;江苏大学科技创新团队资助 |
| |
| 摘 要： | 基于ANSYS软件,对中国低活化马氏体钢(CLAM钢)TIG焊的焊接过程进行三维动态数值模拟,并对焊接温度场、焊缝中心线处残余应力分布以及焊件的角变形结果进行了分析。结果表明:在设定的焊接参数下2层焊缝均处于熔透状态,且热源分布关于焊缝中心对称;横向应力在起焊端和止焊端为压应力,中部为拉应力,纵向应力均为拉应力,而且模拟结果与试验结果吻合较好;盖面焊层焊完后的角变形明显比打底焊层焊完后的角变形大。
|
| 关 键 词： | CLAM钢 ANSYS 温度场 应力场 变形 |
Three-dimensional numerical simulation of residual stress and deformation on butt-welding of CLAM Steel |
| |
| YIN Sha,LEI Yu-cheng,SHAO Qi-dong,JU Xin.Three-dimensional numerical simulation of residual stress and deformation on butt-welding of CLAM Steel[J].Welding Technology,2010,39(1). |
| |
| Authors: | YIN Sha LEI Yu-cheng SHAO Qi-dong JU Xin |
| |
| Affiliation: | 1.School of Material Science and Engineering of Jiangsu University;Zhenjiang 212013;Jiangsu pro.;China;2.Physics Department of University of Science and Technology of Beijing;Beijing 100083;China |
| |
| Abstract: | Based on ANSYS software, the distribution of residual stress along the welding central line and the angular distortion of weldment were analyzed. The results showed that both of the beads were penetrated under the welding parameters. The transverse stress of welding starting point and ending point was compressive stress. In middle area of the welding the transverse turned to tensile stress, and the longitudinal stress was tensile stress. Comparing the results of simulation with that of experiment, the numer... |
| |
| Keywords: | CLAM steel ANSYS temperature field residual stress field deformation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
