| 环缝洗涤工艺在水钢1350m3高炉煤气除尘中的应用 |
| |
| 引用本文： | 谢虹. 环缝洗涤工艺在水钢1350m3高炉煤气除尘中的应用[J]. 山东冶金, 2007, 29(2): 61-62 |
| |
| 作者姓名： | 谢虹 |
| |
| 作者单位： | 中冶赛迪工程技术股份有限公司,燃气室,重庆,400013 |
| |
| 摘 要： | 水钢1350m^3高炉煤气清洗系统采用环缝洗涤工艺,该工艺具有洗涤水耗量低、设备维护工作量小、设备占地面积省等特点,投产净煤气含尘量小于5mg/m^3,机械水含量小于7g/m^3。据现场调试经验,建议对环缝洗涤器增加窥视镜或检测设备,以确定注油量。
|
| 关 键 词： | 高炉煤气 除尘 环缝洗涤工艺 环缝洗涤器 耗水量 |
| 文章编号： | 1004-4620（2007）02-0061-02 |
| 修稿时间： | 2007-01-05 |
Application of Annular Gap Scrubbing Process in Dedusting of 1350m3 Blast Furnace Gas of Shuigang |
| |
| XIE Hong. Application of Annular Gap Scrubbing Process in Dedusting of 1350m3 Blast Furnace Gas of Shuigang[J]. Shandong Metallurgy, 2007, 29(2): 61-62 |
| |
| Authors: | XIE Hong |
| |
| Affiliation: | The Fuel Gas Department of CISDI Engineering Co., Ltd., Chongqing 400013, China |
| |
| Abstract: | The annular gap scrubbing technology is adopted in the gas cleaning system of 1350m^3 BF of Shuigang. This technology has some characteristics such as low wash water consumption, little equipment maintenance work and small equipment floor space etc. The dust content of the clean gas produced is less than 5mg/m^3, and the free water content is less than 7g/m^3. Based on the experience of site commissioning, suggestion adding a sight or detection instrument for the scrubber is put forward. |
| |
| Keywords: | blast furnace gas dedusting annular gap scrubbing process annular gap scrubber water consumption |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
