| 负压射孔完井产能的有限元分析 |
| |
| 引用本文： | 杨斌,练章华,肖洲,刘昕. 负压射孔完井产能的有限元分析[J]. 钻采工艺, 2008, 31(2): 29-31,45 |
| |
| 作者姓名： | 杨斌 练章华 肖洲 刘昕 |
| |
| 作者单位： | 西南石油大学国家重点实验室 |
| |
| 基金项目： | 教育部科学技术研究项目 , 四川省青年基金 |
| |
| 摘 要： | 建立负压射孔完井渗流有限元3D模型.该模型包含了流体物性参数、地层伤害参数、射孔几何参数,以及生产参数.在有限元分析时假设射孔孔道无堵塞,而负压射孔对完井产能的影响主要在于负压射孔导致的冲击回流将造成地层伤害的微粒从孔眼周围的压实带中冲刷了出来,增大了压实带的渗透率,从而提高了完井产能.在此分析的基础上,引入了相对产率比概念,并使用射孔完井渗流有限元3D模型详细研究了负压射孔对完井产能的影响.该研究对负压射孔完井具有一定的指导意义.
|
| 关 键 词： | 负压射孔 产能 有限元模型 相对产率比 负压射孔 完井产能 有限元分析 Finite Element Method Completion Perforation Modeling Evaluation 意义 指导 研究 使用 产率比 渗透率 冲刷 压实带 孔眼 微粒 回流 冲击 |
| 文章编号： | 1006-768X（2008）02-0029-03 |
| 收稿时间： | 2007-11-03 |
| 修稿时间： | 2008-02-02 |
PRODUCTIVITY EVALUATION AND MODELING OF UNDERBALANCE PERFORATION COMPLETION USING FINITE ELEMENT METHOD |
| |
| YANG Bin,LIAN Zhanghua,XIAO Zhou and LIU Xin. PRODUCTIVITY EVALUATION AND MODELING OF UNDERBALANCE PERFORATION COMPLETION USING FINITE ELEMENT METHOD[J]. Drilling & Production Technology, 2008, 31(2): 29-31,45 |
| |
| Authors: | YANG Bin LIAN Zhanghua XIAO Zhou LIU Xin |
| |
| Abstract: | The 3D Finite Element Model of underbalance perforation completion was established in this paper,it contained physical property parameters of fluid,formation damage parameters,perforation geometric parameters and production parameters.Perforation channel was assumed to be clean in the finite element analysis,the impact of the underbalance perforation completion on flow rate consisted in the cleaning of damage particulate from the compact zone around the perforation channel by the bumping backflow that caused by underbalance perforation,which augmented the permeability of the compact zone and improved the off-take potential.On the basis of the analysis above,the relative productivity ratio was inducted,and using 3D Finite Element Model studied the impact of underbalance perforation on the off-take potential. |
| |
| Keywords: | underbalance perforation off-take potential finite element model relative productivity ratio |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
