| 硝酸型PCB退锡废水回收利用工艺研究 |
| |
| 引用本文： | 张利,刘兴勇.硝酸型PCB退锡废水回收利用工艺研究[J].广州化工,2012,40(12):81-82,117. |
| |
| 作者姓名： | 张利 刘兴勇 |
| |
| 作者单位： | 四川理工学院材料与化学工程学院,四川自贡,643000 |
| |
| 基金项目： | 四川省自贡市科技局项目:印制板废液的综合利用研究 |
| |
| 摘 要： | PCB退锡废水含大量锡、铜、铁等重金属以及硝酸等有机、无机酸,具有强腐蚀性,是多年来严重污染环境的废水之一,本文设计了一种硝酸型PCB退锡废水综合回收利用工艺,研究了相关工艺参数对该类废水中主要成分锡的回收率的影响。实验结果表明:锡与碱用量为1∶4(mol/mol),反应温度在98～105℃,反应时间为80 min时,锡的转化率、回收率最高可达98.5%以上。
|
| 关 键 词： | PCB 退锡废水 回收利用 |
Study on the Retrieve and Utilizing of Nitric Spent Tin Stripper from Printed Circuit Board |
| |
| ZHANG Li,LIU Xing-yong.Study on the Retrieve and Utilizing of Nitric Spent Tin Stripper from Printed Circuit Board[J].GuangZhou Chemical Industry and Technology,2012,40(12):81-82,117. |
| |
| Authors: | ZHANG Li LIU Xing-yong |
| |
| Affiliation: | (School of Material and Chemical Engineering,Sichuan University of Science ＆ Engineering,Sichuan Zigong 643000,China) |
| |
| Abstract: | Spent tin stripper from printed circuit board（PCB） industry was one of the difficultly treated waste water producing serious environmental pollution because of its significant amounts of metals,such as tin,copper,iron,organic acid and inorganic acid（nitric acid）,and it was corrosive.The nitric PCB spent tin stripper recycling process was designed.The effect of the process parameters in each step to recovery rate of tin was studied.The experimental results showed that the separating rate can be higher than 98.5% when the process conditions were as follows,the sodium hydroxide and tin mol ratio 4,slight boiling 100~110 ℃,and time 2 h. |
| |
| Keywords: | printed circuit board spent tin stripper retrieve and utilizing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
