| 夹具约束对铝合金薄板焊接变形的影响 |
| |
| 引用本文： | 张建强,赵海燕,鹿安理,罗传红,郭嘉琳,张国栋. 夹具约束对铝合金薄板焊接变形的影响[J]. 稀有金属材料与工程, 2009, 38(Z3) |
| |
| 作者姓名： | 张建强 赵海燕 鹿安理 罗传红 郭嘉琳 张国栋 |
| |
| 作者单位： | 1. 武汉大学,湖北,武汉,430072
2. 清华大学,北京,100084 |
| |
| 基金项目： | 国家计委产业化前期关键技术研究项目(，清华大学985重点项目 |
| |
| 摘 要： | 采用热弹塑性有限元技术对不同夹具拘束情况下铝合金薄板焊接过程进行了数值模拟,并利用脉冲氩弧焊接工艺、不同的夹具布置形式,研究了厚度为5 mm铝合金薄板构件的挠曲变形.结果表明,冷却过程中夹具对焊缝附近的塑性变形区的收缩等效于反向拉伸,可减小纵向残余塑性应变,因此利用夹具的拘束作用可以控制和减小铝合金薄板焊接残余应力和变形,但夹具对焊缝及附近区域的拘束程度不同,控制焊接变形的效果也不同.采用合理的夹具布置可以将薄板的纵向残余挠度控制在1 mm左右.
|
| 关 键 词： | 铝合金薄板 焊接应力 塑性应变 拘束 数值模拟 |
Effects of Clamps on Welding Distortion in Thin Aluminum Alloy Plate |
| |
| Zhang Jianqiang,Zhao Haiyan,Lu Anli,Luo Chuanhong,Guo Jialin,Zhang Guodong. Effects of Clamps on Welding Distortion in Thin Aluminum Alloy Plate[J]. Rare Metal Materials and Engineering, 2009, 38(Z3) |
| |
| Authors: | Zhang Jianqiang Zhao Haiyan Lu Anli Luo Chuanhong Guo Jialin Zhang Guodong |
| |
| Affiliation: | Zhang Jianqiang1,Zhao Haiyan2,Lu Anli2,Luo Chuanhong1,Guo Jialin1,Zhang Guodong1 (1. Wuhan University,Wuhan 430072,China) (2. Tsinghua University,Beijing 100084,China) |
| |
| Abstract: | The three-dimensional numerical simulation of welding process for aluminum alloy thin plate under the conditions of different clampings was performed by means of thermal-elastic-plastic FEM technology, and the longitudinal flexibility in thickness of 5 mm aluminum alloy thin plate was investigated using pulsed TIG welding technology and different clamp arrangements. The results show that there is an tensile action on welding plasticity zone in cooling process, and residual longitudinal plastic strain is red... |
| |
| Keywords: | thin aluminum alloy plate welding stress plasticity strain constrainment numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
