首页 | 本学科首页   官方微博 | 高级检索  
     

多组分液相吸附各组分吸附量的计算方法
引用本文:杨向平,周建昌,宋锡周.多组分液相吸附各组分吸附量的计算方法[J].石油炼制与化工,1995(4).
作者姓名:杨向平  周建昌  宋锡周
作者单位:石油大学
摘    要:吸附量是吸附平衡实验的基本数据之一。对于液相吸附难于直接区分表面润湿量与吸附量,故都采用间接法。尤其当实验中液相总量较少时,用作分析的取样量显著影响其准确性,对于这种情况下多元液相吸附量计算方法也少见。本文提出了一种考虑取样影响、加入惰性组分的较完善的方法以用于基本数据的处理。

关 键 词:液相,吸附现象,惰性,化合物

A CALCULATION METHOD OF INDIVIDUALCOMPONENT ADSORPTIVE CAPACITY INMULTICOMPONENT LIQUID ADSORPTION
Yang Xiangping, Zhou Jianchang, Song Xizhou.A CALCULATION METHOD OF INDIVIDUALCOMPONENT ADSORPTIVE CAPACITY INMULTICOMPONENT LIQUID ADSORPTION[J].Petroleum Processing and Petrochemicals,1995(4).
Authors:Yang Xiangping  Zhou Jianchang  Song Xizhou
Abstract:Adsorptive capacity is one of the basic data in adsorption equilibrium experiment. itis difficult to distinguish between the surface wetness. and adsorbance, so the indirect method is oftenused. Especially, when the total liquid mixture is small in quantity, the accurate extent of adsorptive capacity is strikingly affected by sampling. In this case, a complete calculated method for multicomponentliquid adsorption is hardly found. This paper recommends a method considering the sampling effect and theaddition of inert component, which can be used for sorting out the basic data.
Keywords:liquid phase  adsorption  inert compounds
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号