首页 | 本学科首页   官方微博 | 高级检索  
     


Exploring dynamic surface processes during silicate mineral (wollastonite) dissolution with liquid cell TEM
Authors:DN LEONARD  R HELLMANN
Affiliation:1. Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee, U.S.A.;2. ISTerre (Institute for Earth Sciences), Université Grenoble Alpes, Grenoble, France;3. ISTerre, CNRS‐UMR, Grenoble, France
Abstract:Most liquid cell transmission electron microscopy (LC TEM) studies focus on nanoparticles or nanowires, in large part because the preparation and study of materials in this size range is straightforward. By contrast, this is not true for samples in the micrometre size range, in large part because of the difficulties associated with sample preparation starting from a ‘bulk’ material. There are also many advantages inherent to the study of micrometre‐sized samples compared to their nanometre‐sized counterparts. Here, we present a liquid cell transmission electron study that employed an innovative sample preparation technique using focused ion beam (FIB) milling to fabricate micrometre‐sized electron transparent lamellae that were then welded to the liquid cell substrate. This technique, for which we have described in detail all of the fabrication steps, allows for samples having dimensions of several square micrometres to be observed by TEM in situ in a liquid. We applied this technique to test whether we could observe and measure in situ dissolution of a crystalline material called wollastonite, a calcium silicate mineral. More specifically, this study was used to observe and record surface dynamics associated with step and terrace edge movement, which are ultimately linked to the overall rate of dissolution. The wollastonite lamella underwent chemical reactions in pure deionized water at ambient temperature in a liquid cell with a 5‐urn:x-wiley:00222720:media:jmi12509:jmi12509-math-0001m‐spacer thickness. The movement of surface steps and terraces was measured periodically over a period of almost 5 h. Quite unexpectedly, the one‐dimensional rates of retreat of these surface features were not constant, but changed over time. In addition, there were noticeable quantitative differences in retreat rates as a function crystallographic orientation, indicating that surface retreat is anisotropic. Several bulk rates of dissolution were also determined (1.6–4.2 ? 10?7 mol m?2 s?1) using the rates of retreat of representative terraces and steps, and were found to be within one order of magnitude of dissolution rates in the literature based on aqueous chemistry data.
Keywords:Bulk dissolution rate  crystalline wollastonite mineral  lamella preparation by FIB  liquid cell TEM  step edge and terrace movement  surface retreat rates
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号