|
|||||
|
|
| 烟叶分切工艺在打叶复烤生产中的应用 | |
| 引用本文： | 王晓耕,江家洪,冉宁,刘寿斌,吴昊. 烟叶分切工艺在打叶复烤生产中的应用[J]. 烟草科技, 2005, 0(2): 3-4 |
| 作者姓名： | 王晓耕 江家洪 冉宁 刘寿斌 吴昊 |
| 作者单位： | 1. 昆明格雷柏科技有限公司,昆明市人民西路162号体委综合大楼4楼,650031 2. 遵义市烟叶有限责任公司,贵州省遵义市董公寺镇,563000 3. 贵州申义烟叶复烤有限责任公司,贵州省湄潭县羊叉路,564100 4. 毕节地区烟叶复烤厂,贵州省毕节市头步桥,566000 |
| 基金项目： | 国家烟草专卖局基金资助项目(2001B10)。 |
| 摘 要： | 为解决打叶复烤过程中加工较长(>400mm)烟叶时烟叶相互缠绕及与设备相缠绕造成预处理段堵料和后续分料不均匀、故障停机次数多、设备有效运行率低等问题,进行了烟叶分切全打叶的工艺改进实验。应用结果表明,改进后的效果明显,不仅彻底解决了以上问题,而且对主要打叶质量指标没有大的影响。在此基础上,进一步实现了既可对叶尖切两刀又可对烟叶进行单刀分切的不同加工要求。 |
| 关 键 词： | 烟叶分切 切尖 切把 烟叶缠绕 |
| 文章编号： | 1002-0861(2005)02-0003-03 |
| 修稿时间： | 2004-05-28 |
Leaf Cutting before Threshing and Redrying |
|
| WANG XIAO-GENG. Leaf Cutting before Threshing and Redrying[J]. Tobacco Science & Technology, 2005, 0(2): 3-4 | |
| Authors: | WANG XIAO-GENG |
| Abstract: | Longer leaves (>400 mm) tend to tangle one another and/or twisted round machine elements, which (result) in jamming or interrupted tobacco flow and frequent machine stop during processing in threshing and redrying line. Experiments on leaf cutting before threshing were carried out. The results showed that the problems mentioned above were solved perfectly, while the major quality indexes of threshing and redrying were almost uninfluenced. Different processing requirements as two-cut for tipping or one-cut for leaf cutting were achieved also. |
| Keywords: | Leaf cutting Tipping Butting Threshing and redrying |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |