| 限幅绝缘盖板注射模设计 |
| |
| 引用本文： | 王宏斌.限幅绝缘盖板注射模设计[J].模具工业,2007,33(5):53-56. |
| |
| 作者姓名： | 王宏斌 |
| |
| 作者单位： | 郑州航天电子技术有限公司,河南,驻马店,463000 |
| |
| 摘 要： | 通过对限幅绝缘盖板的工艺分析,确定了开放型腔、滑块脱模的模具结构。模具构思巧妙,结构简单,成功地解决了塑件成型及顺利脱模的问题,大大降低了模具成本,缩短了研制周期。
|
| 关 键 词： | 注射模 滑块 分型面 型腔 脱模机构 |
| 文章编号： | 1001-2168(2007)05-0053-04 |
| 修稿时间： | 07 28 2006 12:00AM |
Design of injection mould for slicing insulating cover plate |
| |
| WANG Hong-bin.Design of injection mould for slicing insulating cover plate[J].Die & Mould Industry,2007,33(5):53-56. |
| |
| Authors: | WANG Hong-bin |
| |
| Affiliation: | Zhengzhou Aerospace Electronic Technology Co., Ltd, Zhumadian, Henan 463000, China |
| |
| Abstract: | An injection mould with open-type cavity and slide block type of ejection mechanism was developed after an analysis on the forming process of a slicing insulating cover plate.The structure of the mould meets the requirement for shaping and ejecting smoothly. |
| |
| Keywords: | injection mould slide block parting line cavity ejection mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
