| Al2O3/NiCrCr3C2耐磨复合涂层制备及其摩擦学特性研究 |
| |
| 引用本文： | 陈海涛,李忠盛,孙彩云,何庆兵,吴护林.Al2O3/NiCrCr3C2耐磨复合涂层制备及其摩擦学特性研究[J].稀有金属材料与工程,2011(Z2):447-451. |
| |
| 作者姓名： | 陈海涛 李忠盛 孙彩云 何庆兵 吴护林 |
| |
| 作者单位： | 中国兵器工业第五九研究所;重庆大学 |
| |
| 基金项目： | 武器装备预研基金(9140A18030310BQ1904);重庆市科技公关计划(CSTC,2009AC4015) |
| |
| 摘 要： | 采用电化学技术与等离子技术相结合的方法在7A55铝合金表面制备Al2O3/Ni_Cr_Cr3C2耐磨复合涂层。用金相显微镜、扫描电镜等对耐磨复合涂层的表面及截面形貌进行观察。结果表明:该涂层表面平整、光滑,厚度均匀;结合力等级达到0级;最后测试了该复合涂层的摩擦系数和磨损失重,摩擦系数平均值为0.0179,磨损率为6.7×10-4。
|
| 关 键 词： | 微弧氧化 7A55铝合金 耐磨复合涂层 等离子喷涂 磨损机制 |
Study on Al2O3/NiCrCr3C2 Wearing Composite Coating and Its Tribological Properties |
| |
| Chen Haitao,Li Zhongsheng,Sun Caiyun,He Qingbing,Wu Hulin.Study on Al2O3/NiCrCr3C2 Wearing Composite Coating and Its Tribological Properties[J].Rare Metal Materials and Engineering,2011(Z2):447-451. |
| |
| Authors: | Chen Haitao Li Zhongsheng Sun Caiyun He Qingbing Wu Hulin |
| |
| Affiliation: | 1 (1. No.59 Institute of China Ordnance Industry, Chongqing 400039, China) (2. Chongqing University, Chongqing 400030, China) |
| |
| Abstract: | A wear-resisting composite coating Al2O3 /Ni_Cr_Cr3C2 was prepared on 7A55 aluminum by galvano-chemistry and plasma spraying. Surface microphologies and cross-microphologies were observed by OM and SEM. The result shows that the composite coating surface is flat and smooth, and thickness has uniform distribution. The cohesion force grade is 0. Finally the coefficient of friction and wearing ratio were tested. The coefficient of friction is 0.0179 on an average, and wearing ratio is 6.7×10-4 . |
| |
| Keywords: | micro-arc oxidation 7A55 aluminium alloy wearing composite coating plasma spraying mechanism of wearing |
| 本文献已被 CNKI 等数据库收录！ |
