| 供氧压力对顶吹转炉内流场影响数值模拟 |
| |
| 引用本文： | 刘威,李京社,杨宏博,唐海燕,杨树峰.供氧压力对顶吹转炉内流场影响数值模拟[J].中国冶金,2014,24(12):19-22. |
| |
| 作者姓名： | 刘威 李京社 杨宏博 唐海燕 杨树峰 |
| |
| 作者单位： | 北京科技大学冶金与生态工程学院， 北京 100083 |
| |
| 摘 要： | 利用CFD软件建立了顶吹转炉炉内流场的三维数学模型。通过对该模型模拟结果的全面分析，研究供氧压力对O2射流以及钢液流场的影响。模拟结果表明，随着供氧压力增大，O2射流马赫数变大，高速段变长，但多股O2射流间干扰效应只有在处于设计氧压时最弱。O2射流的变化规律又进一步对钢液流场造成影响，在低于设计氧压时(0.7MPa)，流场流动性较差，而在高于设计氧压时(0.9MPa)，钢液流场也无明显改善。
|
| 关 键 词： | 转炉 炼钢 数值模拟 氧枪 供氧压力 |
Simulation of the oxygen pressure influence on fluid flows in top blown converter |
| |
| LIU Wei,LI Jing-she,YANG Hong-bo,TANG Hai-yan,YANG Shu-feng.Simulation of the oxygen pressure influence on fluid flows in top blown converter[J].China Metallurgy,2014,24(12):19-22. |
| |
| Authors: | LIU Wei LI Jing-she YANG Hong-bo TANG Hai-yan YANG Shu-feng |
| |
| Affiliation: | （School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China） |
| |
| Abstract: | A 3D transient numerical model of molten steel and oxygen flow was built using CFD software.Through this model the effect of oxygen pressure on oxygen j et and molten steel flow was analyzed comprehensively.The simulation results show that the oxygen j et Mach number and the high-speed range increased with oxygen pressure rising.But the disturbance caused by multiple jets coalescence was the weakest only under designed oxygen pressure （0.8 MPa）.Moreover,jets under different oxygen pressures had further effect on the molten steel flow.Lower ox-ygen pressure （0.7 MPa）led to low speed molten steel flow,while higher oxygen pressure （0.9 MPa）could not ob-viously improve the flow field of molten steel. |
| |
| Keywords: | converter steelmaking numerical simulation oxygen lance oxygen pressure |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
