首页 | 本学科首页   官方微博 | 高级检索  
     

TiNi合金表面沉积类金刚石薄膜的性能评价
引用本文:崔琳,柳翠,齐民,李国卿.TiNi合金表面沉积类金刚石薄膜的性能评价[J].功能材料,2005,36(8):1223-1225.
作者姓名:崔琳  柳翠  齐民  李国卿
作者单位:大连理工大学,三束材料改性国家重点实验室,材料工程系,辽宁,大连,116024;大连理工大学,三束材料改性国家重点实验室,材料工程系,辽宁,大连,116024;大连理工大学,三束材料改性国家重点实验室,材料工程系,辽宁,大连,116024;大连理工大学,三束材料改性国家重点实验室,材料工程系,辽宁,大连,116024
基金项目:国家高技术研究发展计划(863计划)资助项目(2002AA326010)
摘    要:类金刚石膜作为新型的生物材料得到了广泛的关注。本实验制备的薄膜为典型的类金刚石膜,膜层比较致密、均匀和光滑。膜层硬度随离子束能量变化,在束电源为750V附近出现峰值,硬度达到了15GPa,该膜的摩擦系数为0.124。在Troyde’s模拟体液中的电化学分析表明,类金刚石膜显著提高了TiNi合金表面抗点蚀能力。

关 键 词:TiNi合金  类金刚石膜  离子束  表面改性  表面性能
文章编号:1001-9731(2005)08-1223-03
修稿时间:2004年12月13

Characterization of DLC film deposition on surface of TiNi alloy
CUI Lin,LIU Cui,QI Min,LI Guo-qing.Characterization of DLC film deposition on surface of TiNi alloy[J].Journal of Functional Materials,2005,36(8):1223-1225.
Authors:CUI Lin  LIU Cui  QI Min  LI Guo-qing
Abstract:DLC film as biocompatible material has drawn much attention.We have prepared DLC film successfully confirmed by Raman spectra,with condensed,uniform and smooth surface.Hardness of films changes according to ion beam energy,and the maximum hardness appeared at about 750V beam voltage was 15GPa,the friction coefficient was approximately 0.124.Electro-chemical analysis in Troyde's solution showed that DLC films on the surface of TiNi alloy improve resistance of TiNi alloy to pitting corrosion.
Keywords:TiNi alloy  diamond-like carbon(DLC) film  ion beam  surface modification  surface properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号