| 未知型线凸轮的测量基准点的确定 |
| |
| 引用本文： | 黄劲. 未知型线凸轮的测量基准点的确定[J]. 西华大学学报(自然科学版), 1989, 8(4): 264-267 |
| |
| 作者姓名： | 黄劲 |
| |
| 作者单位： | 四川工业学院机制工艺教研室 |
| |
| 摘 要： | 本文应用数学和测量的实际方法,经数据分析使所测凸轮处于最佳桃尖位置,从而提高分析使所测凸轮处于最佳桃尖位置,从而提高凸轮升程值的可靠性,为设计人员推导凸轮型线方程以及对发动机结构分析提供了原始依据。
|
| 关 键 词： | 基准点 升程 凸轮型线 |
DETERMINATION OF BASE POINT OF MEASUREMENT FOR UNKNOWN-OUTLINE CAMS |
| |
| Huang Jing. DETERMINATION OF BASE POINT OF MEASUREMENT FOR UNKNOWN-OUTLINE CAMS[J]. Journal of Xihua University(Natural Science Edition), 1989, 8(4): 264-267 |
| |
| Authors: | Huang Jing |
| |
| Abstract: | In this paper, by using mathematical and practical measurement method as well as data analysis, measured cam is put in optimal up- point position, thus the reliability of measuring the lift of the cam is increased, supplying prime foundation of deducing linear equations of cams and analyzing engine structure for designers. |
| |
| Keywords: | Base point Lift Outline of cam |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
