| 特殊结构扁钢丝绳的研制 |
| |
| 引用本文： | 白永福,张国辉,丁俊山.特殊结构扁钢丝绳的研制[J].金属制品,2006,32(2):1-2. |
| |
| 作者姓名： | 白永福 张国辉 丁俊山 |
| |
| 作者单位： | 宁夏恒力钢丝绳股份有限公司,石嘴山,753202 |
| |
| 摘 要： | P6×4×12结构扁钢丝绳结构独特,在GB/T 8918—1996《钢丝绳》中没有相应的规定和参照。通过研究,确定出工艺参数:子绳为3+9结构,钢丝直径2.1 mm;纬绳为1+6结构,钢丝直径1.6 mm,并给出子绳和纬绳的捻距。编织的P6×4×12-124 mm×28 mm扁钢丝绳线质量为10.375 kg/m,破断拉力总和为1 366.6 kN,与用户要求的线质量10.3(1±3%)kg/m、破断拉力总和大于1 365.9 kN相符合,满足了用户要求。
|
| 关 键 词： | 扁钢丝绳 编织 捻制 研制 |
| 收稿时间： | 2005-09-14 |
| 修稿时间： | 2005年9月14日 |
Development of Special Structure Flat Wire Rope |
| |
| Bai Yongfu,Zhang Guohui,Ding Junshan.Development of Special Structure Flat Wire Rope[J].Steel Wire Products,2006,32(2):1-2. |
| |
| Authors: | Bai Yongfu Zhang Guohui Ding Junshan |
| |
| Abstract: | P6×4×12 structure flat wire rope has unusual structure,has no corresponding regulation and reference in GB/T8918—1996 Wire Rope standard.It is confirmed by research that the parameters are: warp rope adopts 3+9 structure and steel wire diameter is 2.1mm;woof rope adopts 1+6 structure and steel wire diameter is 1.6mm.The lay pitches of warp rope and woof rope are given out.The unit mass and aggregate breaking force of the weaved P6×4×12-124mm×28mm flat wire rope are 10.375kg/m and 1366.6kN respectively,which correspond with the consumers' requirements for unit mass of 10.3(1±3%) kg/m and aggregate breaking force of 1365.9kN,satisfies the demand of consumers. |
| |
| Keywords: | flat wire rope weave twist development |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
