| 金属板料二次成型的有限元分析 |
| |
| 引用本文： | 诸旭妹,张怀存.金属板料二次成型的有限元分析[J].北京机械工业学院学报,2006,21(4):33-36. |
| |
| 作者姓名： | 诸旭妹 张怀存 |
| |
| 作者单位： | 北京机械工业学院机械工程系,北京100085 |
| |
| 基金项目： | 北京市教委科技发展计划项目 |
| |
| 摘 要： | 为了实现同台压力机加工多品种、多型号的板料,大型板料的成型采用同机分步成型,通过采用板料成型动力显式有限元模拟,采用四节点退化壳单元对板料进行离散化,利用中心差分法离散时间域,建立动力显式计算格式,采用罚函数法和修正库仑定理计算接触力和摩擦力.对二次成形过程,建立有限元分析计算模型,通过Dynaform软件仿真得出同机分步成形法的可行性.
|
| 关 键 词： | 有限元 数值模拟 板料成型 |
| 文章编号： | 1008-1658（2006）04-0033-04 |
| 收稿时间： | 2006-09-22 |
| 修稿时间： | 2006年9月22日 |
Finite element analysis for twice metal formings |
| |
| ZHU Xu-mei,ZHANG Huai-cun.Finite element analysis for twice metal formings[J].Journal of Beijing Institute of Machinery,2006,21(4):33-36. |
| |
| Authors: | ZHU Xu-mei ZHANG Huai-cun |
| |
| Affiliation: | Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085, China |
| |
| Abstract: | The separate dies and different-step sheet ize the processing of multiple varieties and multiple metal forming is applied to big blank forming to realmodels on the same pressing machine. A finite element model for dynamic analysis of sheet metal forming process is elaborated in this paper. Four-node degenerated shell elements are adopted to discretize sheet metal. The central difference is set up. Penaltv method is employed to calculate normal contact force and revised Coulumbic friction law is employed for modeling friction. Finite element computing model is set up for the processes of two metal formings. The feasibility of separate dies and different-step sheet metal forming is certified by using the software of Dvnaform. |
| |
| Keywords: | finite element numerical simulation metal forming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
