Thermal performance of latent heat storage for free cooling of buildings in a dry and hot climate: An experimental study

Experimental studies on the Phase Change Material (PCM) storage unit for building ventilation in dry and hot climates were conducted to determine its thermal performance. The PCM unit stored the night time coolness and used it for cooling the hot ambient air during day time. The influence of air flow rate and the inlet air temperature on cold accumulation in PCM during charging process and cold extraction from the PCM during discharging process were analyzed. The air temperatures used for charging of PCM were 20^oC, 22^oC and 24^oC, while during the discharging process, it was at 36^oC, 38^oC and 40^oC. The air flow rates considered for charging of PCM were 4 and 5 m³/hr/kg of PCM. Experimental observations showed that solidification of PCM was more sensitive to the charging air temperature compared to the air flow rate. When the charging air temperature was reduced from 22^oC to 20^oC, ∼33% less time was needed to completely solidify the PCM. Moreover, when the charging temperature was increased from 22^oC to 24^oC, ∼52% more time was required by the PCM to complete the solidification process. Changing the air flow rate from 4 m³/hr to 5 m³/hr reduced the solidification time period up to ∼16%.