| 高效加工装置回转钻模的设计 |
| |
| 引用本文： | 尹克俭. 高效加工装置回转钻模的设计[J]. 现代制造技术与装备, 2009, 0(1) |
| |
| 作者姓名： | 尹克俭 |
| |
| 作者单位： | 湖南师范大学工学院,长沙,410081 |
| |
| 基金项目： | 湖南省教育厅资助项目 |
| |
| 摘 要： | 零件在回转钻模上定位夹紧后,其一面上的孔,加工完以后,经过分度机构分度后,即可加工零件另一个面上的孔.这样既保证了零件的加工质量,又提高了零件的加工效率.回转钻模的设计关键有两个方面:一是分度机构的设计,二是夹紧机构的设计.
|
| 关 键 词： | 钻模 机构 设计 |
Efficient Processing Installation Turns Around to Get into the Design of Mould |
| |
| YIN Kejian. Efficient Processing Installation Turns Around to Get into the Design of Mould[J]. Modern Manufacturing Technology and Equipment, 2009, 0(1) |
| |
| Authors: | YIN Kejian |
| |
| Affiliation: | A Project Supported by Scientific Research Fund Hunan Provincial Education Department;Chansha 410081 |
| |
| Abstract: | Parts on rotary positioning clamping jig, the one surface of the hole, after processing, after sub-degree institutions indexing, you can process parts of the hole to another surface, so that not only guarantees the quality of machining but also improve the machining efficiency. The design of rotary drilling mode key has two aspects: First is the design of sub-degree institution, second is the clamping design. |
| |
| Keywords: | get into mould organization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
