| 齿轮钢20CrMoNb奥氏体晶粒尺寸及相变行为 |
| |
| 引用本文： | 王秉新,刘相华,王国栋,徐香秋.齿轮钢20CrMoNb奥氏体晶粒尺寸及相变行为[J].材料科学与工艺,2009(5):620-623. |
| |
| 作者姓名： | 王秉新 刘相华 王国栋 徐香秋 |
| |
| 作者单位： | 辽宁石油化工大学机械工程学院;东北大学轧制技术及连轧自动化国家重点实验室;一汽集团技术中心; |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目(G2000067208-4) |
| |
| 摘 要： | 在Gleeble1500热模拟试验机上对20CrMoNb齿轮钢进行了不同温度处理以及连续冷却相变实验,使用光学显微镜、透射电子显微镜以及膨胀曲线方法研究了齿轮钢20CrMoNb加热时奥氏体晶粒尺寸变化及连续冷却相变行为.实验结果表明,加热温度在1050℃以下时,奥氏体晶粒细小;超过此温度,NbC粒子数量因溶解而大大降低,对晶界的钉扎作用消失,奥氏体晶粒急剧粗化.20CrMoNb齿轮钢含有一定量的Mo、Nb元素,奥氏体比较稳定,出现先共析铁素体与珠光体的冷速很小.
|
| 关 键 词： | 齿轮钢 奥氏体晶粒尺寸 NbC 显微组织 |
Austenite grain size and continuous cooling transformation behavior in 20CrMoNb gear steel |
| |
| WANG Bing-xin,LIU Xiang-hua,WANG Guo-dong,XU Xiang-qiu.Austenite grain size and continuous cooling transformation behavior in 20CrMoNb gear steel[J].Materials Science and Technology,2009(5):620-623. |
| |
| Authors: | WANG Bing-xin LIU Xiang-hua WANG Guo-dong XU Xiang-qiu |
| |
| Affiliation: | WANG Bing-xin1,2,LIU Xiang-hua2,WANG Guo-dong2,XU Xiang-qiu3(1.The College of Mechanical Engineering,Liaoning Shihua University,Fushun 113001,China,2.The State Key Lab of Technology & Automation,Northeastern University,Shenyang 110004,3.Technical Center,China FAW Group Corporation,Changchun 130011,China) |
| |
| Abstract: | Austenitizing at different reheating temperatures and continuous cooling transformation tests to 20CrMoNb gear steel were carried out using a Gleeble 1500 hot simulator.The evolution of austenite grain size after reheating and the continuous cooling transformation behavior were investigated by means of optical microscope,transparent electron microscope and dilatometry.The experimental results show that austenite grain grows slowly at the reheating temperatures lower than 1050 ℃.Exceeding this temperature,the amount of NbC particles is greatly decreased because of dissolution,and the pinning role of NbC particles on austenite grain disappears,which causes a rapid growth of austenite grain.The stability of austenite against the formation of proeutectoid ferrite and pearlite is high due to the addition of Mo and Nb,resulting in very low cooling rate of proeutectoid ferrite and pearlite microstructure. |
| |
| Keywords: | gear steel grain size of austenite NbC microstructure |
| 本文献已被 CNKI 等数据库收录！ |
|
