| 台阶形锻件焖锻成形新析 |
| |
| 引用本文： | 王林,张奉军. 台阶形锻件焖锻成形新析[J]. 锻压装备与制造技术, 2004, 39(4): 58-59 |
| |
| 作者姓名： | 王林 张奉军 |
| |
| 作者单位： | 1. 甘肃海林中科科技股份有限公司,甘肃,天水,741018
2. 济南大学,山东,济南,250022 |
| |
| 摘 要： | 通过分析焖锻成形工艺，对该工艺过程中可能出现的缺陷进行了进一步的分析探讨，并提出了相应的预防措施。
|
| 关 键 词： | 焖锻成形工艺 锻造方法 胎模成形工艺 辗扩工艺 锻件 压力机 挤压成形工艺 |
| 文章编号： | 1672-0121(2004)04-0058-02 |
| 修稿时间： | 2003-12-09 |
Technology of Forming by Loose Tooling & Die Design of Stepped Forgings |
| |
| WANG Lin,ZHANG Fengjun. Technology of Forming by Loose Tooling & Die Design of Stepped Forgings[J]. China Metalforming Equipment & Manufacturing Technology, 2004, 39(4): 58-59 |
| |
| Authors: | WANG Lin ZHANG Fengjun |
| |
| Affiliation: | WANG Lin1,ZHANG Fengjun2 |
| |
| Abstract: | With analysis on technology of forming by loose tooling,possible defects in such process have been discussed and corresponding preventing measures have been put forward. |
| |
| Keywords: | Forming by loose tooling Rollover Trumpet Burr |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
