首页 | 本学科首页   官方微博 | 高级检索  
     

混频激励生物电阻抗测量系统
引用本文:王超,钱相臣,王湘嵛,王化祥,闫勇. 混频激励生物电阻抗测量系统[J]. 仪器仪表学报, 2007, 28(6): 961-965
作者姓名:王超  钱相臣  王湘嵛  王化祥  闫勇
作者单位:1. 天津大学电气与自动化工程学院,天津,300072,中国
2. 英国肯特大学电子系,肯特坎特伯雷,CT2 7NT,英国
基金项目:国家自然科学基金;国家自然科学基金;国家自然科学基金
摘    要:为获得同一时刻,不同频率下的生物电阻抗信息,本文采用混频激励模式,对生物电阻抗进行测量。为了提高系统的测量精度,本文在虚参考矢量方法与乘法解调技术相结合的测量方法基础上构建而成。系统设计中采用了模块化设计思路,并通过DSP实现对各个模块的控制功能。上位机软件采用VB语言编写,主要实现对下位机配置、串口通信、显示数据等功能。以阻容器件为对象,利用Agilent4294A阻抗分析仪对系统进行了标定,证明该系统具有较高精度和准确性;以人体为对象,也获得与阻抗分析仪测量结果趋势一致的生物阻抗信息。

关 键 词:混频测量  乘法解调  虚参考矢量
修稿时间:2007-04-01

Mixing frequency based bioelectrical impedance measurement
Wang Chao,Qian Xiangchen,Wang Xiangyu,Wang Huaxiang,Yan Yong. Mixing frequency based bioelectrical impedance measurement[J]. Chinese Journal of Scientific Instrument, 2007, 28(6): 961-965
Authors:Wang Chao  Qian Xiangchen  Wang Xiangyu  Wang Huaxiang  Yan Yong
Affiliation:1 School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072, China ; 2 Department of Electronics, University of Kent, Canterbury, Kent CT2 7NT, U.K.
Abstract:In order to acquire the bioelectrical impedance information at different frequencies concurrently,a new measurement system was developed using a mixing frequency approach.The system design is based on the virtual reference vector method and multiplication demodulation technique.The implementation of the system hardware is achieved using a modular structure.A digital signal processor controls various modules in the system,and the system software realizes configuration of the digital signal processor,serial communication and data presentation,etc.A reference impedance analyzer(Agilent 4294A)is used to provide reference data in order to evaluate the developed system.Results obtained on a human body show that the system performs well in terms of functionality and accuracy.
Keywords:mixing frequency measurement  multiplication demodulation  virtual reference vector
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号