| 铁素体对铸造奥氏体不锈钢CF-3M性能的影响 |
| |
| 引用本文： | 陈继志,颜红兵,郑咏梅,徐健.铁素体对铸造奥氏体不锈钢CF-3M性能的影响[J].材料开发与应用,2002,17(6):9-11,14. |
| |
| 作者姓名： | 陈继志 颜红兵 郑咏梅 徐健 |
| |
| 作者单位： | 洛阳船舶材料研究所,洛阳,471039 |
| |
| 摘 要： | 研究了铁素体含量对铸造奥氏体不锈钢CF 3M的强度、磁性能的影响 ,结果表明 ,调整Cr、Ni当量比值可以控制铁素体含量 ,从而可以调整钢的强度和磁性能。随Cr、Ni当量比值的增加 ,钢中铁素体含量增加 ,钢的强度也随之增加 ,磁导率增加的速率加快。但铁素体含量以不超过 7%为宜 ,即Cr、Ni当量比值应小于 1.0 2。
|
| 关 键 词： | 铸造 铁素体量 铬当量 镍当量 |
| 文章编号： | 1003-1545(2002)06-0009-03 |
Influences of Ferrite Content on the Performance of Casting Austenitic Stainless Steel CF-3M |
| |
| Chen Jizhi,Yan Hongbing,Zheng Yongmei,Xu Jian.Influences of Ferrite Content on the Performance of Casting Austenitic Stainless Steel CF-3M[J].Development and Application of Materials,2002,17(6):9-11,14. |
| |
| Authors: | Chen Jizhi Yan Hongbing Zheng Yongmei Xu Jian |
| |
| Abstract: | The influences of ferrite content on the strength and magnetic properties of austenitic stainless steel CF-3M were investigated. The results showed that the strength and magnetic properties of the steel could be adjusted by the content of ferrite in the steel. As the increase of the equivalent rate of chromium to nickel, the ferrite content, the strength and the increase rate of magnetic rate of the steel will increase, but the proper content of the ferrite in the steel should be less than 7%, that is the equivalent rate of chromium to nickel should be less than 1.02. |
| |
| Keywords: | Casting Ferrite content Chromium equivalent Nickel equivalent |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
