| 圆锥齿轮三维造型方法 |
| |
| 引用本文： | 胡义刚. 圆锥齿轮三维造型方法[J]. 机床与液压, 2004, 0(4): 122-123 |
| |
| 作者姓名： | 胡义刚 |
| |
| 作者单位： | 上海工程技术大学,上海,200336 |
| |
| 摘 要： | 根据直齿圆锥齿轮渐开线齿廓的形成原理，利用VBA编程，在AutoCAD环境下自动生成渐开线齿廓。基于Solid Edge，提出了一种圆锥齿轮三维造型方法。
|
| 关 键 词： | 渐开线齿廓 齿轮三维造型 圆锥齿轮 |
| 文章编号： | 1001-3881(2004)4-122-2 |
| 修稿时间： | 2003-03-25 |
Three -dimensional Modelling Method of Cone Gear |
| |
| HU Yi-gang. Three -dimensional Modelling Method of Cone Gear[J]. Machine Tool & Hydraulics, 2004, 0(4): 122-123 |
| |
| Authors: | HU Yi-gang |
| |
| Abstract: | According to formation principle of involute profile of cone gear,the involute profile was created under the AutoCAD environment automatically by VBA program.A three-dimensional modeling method of cone gear was introduced based on Solid Edge? |
| |
| Keywords: | Involute profile Three-dimensional modelling of gear Cone gear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
