|
|||||
|
|
| FF-46催化剂在抚顺石化公司加氢裂化装置上的应用 | |
| 引用本文： | 刘鸿勋,徐国威,赵春荣,徐建华,徐国峰. FF-46催化剂在抚顺石化公司加氢裂化装置上的应用[J]. 石化技术与应用, 2013, 31(4): 318-321 |
| 作者姓名： | 刘鸿勋 徐国威 赵春荣 徐建华 徐国峰 |
| 作者单位： | 1. 中国石油抚顺石化公司石油三厂,辽宁抚顺,113001 2. 中国石油化工股份有限公司天津分公司炼油部,天津,300271 3. 中国石油抚顺石化公司催化剂厂,辽宁抚顺,113001 4. 中国石油抚顺石化工程建设有限公司第三分公司,辽宁抚顺,113001 |
| 摘 要： | 为解决直馏混合蜡油产品质量指标达不到国家标准要求问题,中国石油抚顺石化公司在0.4 Mt/a加氢裂化装置上试用了中国石油化工股份有限公司抚顺石油化工研究院研发的FF-46型加氢裂化预处理催化剂。结果表明,在处理量为35 t/h,二、三反应器温度为367.54,371.00℃,高压分离器压力为12.2 MPa,氢油体积比为1 560的工艺条件下,氢耗[V(氢气)/m(原料油)]为165 m3/t,脱硫率为93.4%,脱氮率为99.17%,蜡油单程转化率为74%。 |
| 关 键 词： | 加氢裂化 FF-46催化剂 预处理 直馏混合蜡油 |
Application of catalyst FF-46 in a hydrocracking unit of Fushun Petrochemical Company |
|
| LIU Hong-xun , XU Guo-wei , ZHAO Chun-rong , XU Jian-hua , XU Guo-feng. Application of catalyst FF-46 in a hydrocracking unit of Fushun Petrochemical Company[J]. Petrochemical Technology & Application, 2013, 31(4): 318-321 | |
| Authors: | LIU Hong-xun XU Guo-wei ZHAO Chun-rong XU Jian-hua XU Guo-feng |
| Affiliation: | LIU Hong - xun,XU Guo - wei ,ZHAO Chun - rong,XU Jian - hua ,XU Guo - feng (1. Refinery No 3 of Fushun Petrochemical Company, PetroChina, Fushun 113001, China; 2. Crude oil Refining Department of Tianjin Branch, SINOPEC, Tianjin 300271, China; 3. Catalyst Plant of Fushun Petrochemical Company, PetroChina, Fushun 113001, China ; d. Branch No 3 of Fushun Petrochemical Engineering Construction Co Ltd,PetroChina ,Fushun 113001, China ) |
| Abstract: | In order to resolve the problem of straight run mixed wax oil product quality which could not meet national standard, the catalyst FF - 46 developed by Fushun Research Institute of Petro- leum and Ptrochemicals,SINOPEC,was given a trial in the 0. 4 Mt/a hydrocracking unit of Fushun Petro- chemical Company, PetroChina. The results showed that under the condition of treating load 35 t/h, tem- perature of reactor No 2 and No 3 367.54 and371.00 ℃, pressure of high - pressure separator 12.2 MPa, volume ratio of hydrogen to wax oil 1 560,the hydrogen consumption （hydrogen volume per ton of mixed wax oil ）was 165 m3/t, the desulfu- rization rate was 93.4%, the denitrogenation rate was 99.17% ,and the conversion per pass of mixed wax oil was 74%. |
| Keywords: | hydrocracking catalyst FF-46 pretreatment straight run mixed wax oil |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |