Reversible electrochemical insertion of anions in poly-p-phenylene from aqueous electrolytes

Poly-p-phenylene (PPP) was synthesized from benzene according to the Kovacic method. Electrodes were made from this electronic insulator by cold- or hot-pressing of the loose, brown powder, under the addition of 7.5 wt. % soot (Corax L^®, Degussa AG). The electrochemical insertion and removal of anions HSO^?₄, ClO^?₄ in this material in aqueous solutions of the corresponding acids was investigated by slow cyclic voltammetry.

Initially, only a surface layer of about 0.1 mm thickness takes part in the electrochemical processes, which are reversible. A maximum concentration of anions in the solid of (?C₆H₄?)⁺₇ A^?] is attainable. The maximum degree of insertion is equal to 0.14. The insertion potential U_I shifts strongly into the negative direction with increasing concentration c of the acid. A linear U_I/c relationship is observed as in the case of graphite, where the intercalation potential is more positive by 20–200 mV for the same electrolyte. The round trip current efficiency for the insertion/removal cycle increases with increasing acid concentration attaining 100% in 14 M H₂SO₄ or 11.3 M CHlO₄. For a given concentration, increases in the same order as with graphite (H₂SO₄ < HClO₄ < HBF₄), being somewhat lower for a given electrolyte composition. From anodic current limitation (j_lim = 5–10 mA cm^?2), a diffusion coefficient of about D = 2 × 10^?7 cm² s^?1 is derived for the transport of anions in the bulk of PPP. The striking similarity of our results to former findings with graphite is thoroughly discussed. Some general conclusions are derived thereof.