| 基于虚拟样机技术的塑壳断路器拒分现象仿真分析 |
| |
| 引用本文： | 王东亚,陈德桂.基于虚拟样机技术的塑壳断路器拒分现象仿真分析[J].低压电器,2006(6):10-13,38. |
| |
| 作者姓名： | 王东亚 陈德桂 |
| |
| 作者单位： | 1. 大全集团有限公司,江苏,扬中,212211
2. 西安交通大学,电气工程学院,陕西,西安,710049 |
| |
| 摘 要： | 塑壳断路器操作机构的拒分问题是断路器设计中的核心问题之一,需要尽力避免。通过运用ADAMS仿真软件,对某型号断路器进行了仿真研究,阐述了其机构拒分的原因,通过试验,对所提出的解决方案进行了验证。结果表明,提出的设计方法能够有效解决塑壳断路器拒分问题。
|
| 关 键 词： | 塑壳断路器 操作机构 动力学仿真 脱扣器 |
| 文章编号： | 1001-5531（2006）06-0010-04 |
| 收稿时间： | 12 28 2005 12:00AM |
| 修稿时间： | 2005-12-28 |
Simulation Study on the Anti-Interrupting of Trip Unit in Moulded Case Circuit Breaker Based on Virtual Prototype Technology |
| |
| WANG Dong-ya,CHEN De-gui.Simulation Study on the Anti-Interrupting of Trip Unit in Moulded Case Circuit Breaker Based on Virtual Prototype Technology[J].Low Voltage Apparatus,2006(6):10-13,38. |
| |
| Authors: | WANG Dong-ya CHEN De-gui |
| |
| Abstract: | The anti-interrupting of operating mechanism in moulded case circuit breaker (MCCB) was one of the design problems needed avoiding as much as possible. By using ADAMS simulation software, the simulation research of one-type MCCB was carried out, the causes of anti-interrupting of operating mechanism were expatiated. By using the multi-body dynamic software package to test, the proposed solution was verified. The result shows that the design approach to be put forward can solve anti-interrupting problem effectively. |
| |
| Keywords: | moulded case circuit breaker(MCCB) operating mechanism dynamics simulation trip unit |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
