| T型线槽接头注射模设计 |
| |
| 引用本文： | 李方. T型线槽接头注射模设计[J]. 塑料制造, 2013, 0(7): 46-48 |
| |
| 作者姓名： | 李方 |
| |
| 作者单位： | 广东省技师学院数控技术系,广东博罗516100 |
| |
| 摘 要： | 本文通过对T型线槽接头零件的工艺分析,合理地确定了模具中的推出机构、浇注系统、侧向分型与抽芯机构等机构的结构形式。本文还阐述了模具的工作过程。模具采用了1模2腔的结构。
|
| 关 键 词： | T型线槽接头 注射模 浇注系统 脱模机构 斜导柱侧向分型与抽芯机构 |
Design of T injection mold for the type groove joint |
| |
| Li Fang. Design of T injection mold for the type groove joint[J]. Plastics Manufacture, 2013, 0(7): 46-48 |
| |
| Authors: | Li Fang |
| |
| Affiliation: | Li Fang ( Department of Guangdong Province, NC Technology Technician College Guangdong Boluo, 516100 ) |
| |
| Abstract: | in this paper, by analyzing the process of T type slot connector parts, die structure of ejecting mechanism, gating system, side parting and core pulling mechanism to determine the reasonable mechanism. This paper also describes the working process of the mould. The mold used 1 mold 2 cavity structure. |
| |
| Keywords: | T type groove joint injection mold pouring system demoulding mechanism slanting guiding pole side parting and core pulling mechanism |
| 本文献已被 维普 等数据库收录！ |
