| 定模抽芯注射模设计 |
| |
| 引用本文： | 连力平,张月娥,毋小保. 定模抽芯注射模设计[J]. 模具工业, 2001, 0(4): 26-28 |
| |
| 作者姓名： | 连力平 张月娥 毋小保 |
| |
| 作者单位： | 西安黄河机电股份有限公司 |
| |
| 摘 要： | 根据塑件的结构特点 ,介绍了加嵌片的定模抽芯注射模的主要结构设计。动模部分放入的金属嵌片在合模过程中能准确地插入定模部分的滑块中是设计的关键所在
|
| 关 键 词： | 注射模 定模抽芯 金属嵌片 |
| 修稿时间： | 2000-10-09 |
Design of the Injection Mould with the Core-Pulling System in the Fixed Half |
| |
| Lian Liping et al. Design of the Injection Mould with the Core-Pulling System in the Fixed Half[J]. Die & Mould Industry, 2001, 0(4): 26-28 |
| |
| Authors: | Lian Liping et al |
| |
| Affiliation: | Lian Liping et al |
| |
| Abstract: | According to the structure characteristics of the plastic part, the main structure of the injection mould with an insert and with the core-pulling system in the fixed half was designed. The key point of the design is that the metal insert inlaid in the moving half could accurately insert into the slide block in the fixed half while closing the mould. |
| |
| Keywords: | injection mould core-pulling system in the fixed half metal insert |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
