| 超声振动切削SiCp/Al复合材料的刀具磨损试验 |
| |
| 引用本文： | 程雪利,赵波,刘传绍,焦锋,高国富.超声振动切削SiCp/Al复合材料的刀具磨损试验[J].工具技术,2007,41(4):18-20. |
| |
| 作者姓名： | 程雪利 赵波 刘传绍 焦锋 高国富 |
| |
| 作者单位： | 河南机电高等专科学校机械工程系,453002河南省新乡市;河南理工大学 |
| |
| 基金项目： | 河南省自然科学基金
,
河南省科技攻关项目 |
| |
| 摘 要： | 分别采用超声切削和普通切削两种方式对SiCP/Al复合材料进行了车削试验,研究了切削参数对硬质合金YG6刀具磨损的影响规律,并在同等条件下与聚晶金刚石(PCD)刀具进行了对比。发现超声切削的刀具磨损量要小于普通切削的刀具磨损量;超声切削时PCD刀具的磨损量约为YG6刀具磨损量的1/10,这点和普通切削十分相似。
|
| 关 键 词： | 超声振动切削 具磨损 iCP/Al复合材料 |
| 修稿时间： | 2006-09 |
Experiment of Tool Wear when Ultrasonic Vibration Cutting SiCp/Al Composites |
| |
| Cheng Xueli, Zhao Bo ,liu Chuanshao, et al.Experiment of Tool Wear when Ultrasonic Vibration Cutting SiCp/Al Composites[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2007,41(4):18-20. |
| |
| Authors: | Cheng Xueli Zhao Bo liu Chuanshao |
| |
| Affiliation: | Cheng Xueli Zhao Bo liu Chuanshao et al |
| |
| Abstract: | The influences of cutting parameters on the wear of YG6 tools are studied through the cutting experiments on SiCp/Al composites with ultrasonic cutting and common cutting,and compared with the PCD tool. Discovered that the tool wear of ultrasonic cutting is smaller than common cutting's, the wear of PCD tool is 1/10 of YG6’s in ultrasonic cutting, this is very similar as common cutting. |
| |
| Keywords: | ultrasonic vibration cutting tool wear SiCP/Al composites |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
