| 测控信号的动态模拟 |
| |
| 引用本文： | 兰宏志. 测控信号的动态模拟[J]. 电讯技术, 2012, 52(6): 902-905 |
| |
| 作者姓名： | 兰宏志 |
| |
| 作者单位： | 中国西南电子技术研究所,成都,610036 |
| |
| 摘 要： | 测控信号的动态模拟包括对距离、速度、加速度、传输损耗等状态参数的模拟.以大容量存储器为延时线,基于存储转发模式对测控信号进行高精度的动态模拟,可以解决远距离、高精度与有限的存储容量、读写速率之间的矛盾.载波解调后存储和不解调直接存储两种处理方法可以解决高速调制和中低速调制两种应用场合测控信号的动态模拟.
|
| 关 键 词： | 测控系统 标校设备 动态模拟 存储转发模式 |
Dynamic simulation of TT&C signal |
| |
| LAN Hong-zhi. Dynamic simulation of TT&C signal[J]. Telecommunication Engineering, 2012, 52(6): 902-905 |
| |
| Authors: | LAN Hong-zhi |
| |
| Affiliation: | LAN Hong-zhi(Southwest China Institute of Electronic Technology,Chengdu 610036,China) |
| |
| Abstract: | Dynamic simulation parameters of TT&C signal include distance, velocity, acceleration and propagation loss, etc. The proposed method based on high capacity storage as delay line and storage-transmission mode can solve the confliction among high precision, limited storage capacity and read-write rate. Storage after demodulation and direct storage without demodulation can realize the dynamic simulation of TT&C signal in high-speed data rate modulation and medium-low-speed data rate modulation application scenarios. |
| |
| Keywords: | TT&C system calibration equipment dynamic simulation storage-transmission mode |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《电讯技术》浏览原始摘要信息 |
|
点击此处可从《电讯技术》下载全文 |
|
