| 嵌入式应用开发中通用串行通信程序的设计方法 |
| |
| 引用本文： | 王艳春,王宜怀. 嵌入式应用开发中通用串行通信程序的设计方法[J]. 微型电脑应用, 2006, 22(9): 18-21 |
| |
| 作者姓名： | 王艳春 王宜怀 |
| |
| 作者单位： | 1. 蚌埠学院,蚌埠,233030
2. 苏州大学计算机科学与技术学院,苏州,215006 |
| |
| 摘 要： | 分析了嵌入式开发中不同MCU串行通信编程的共性,根据软件工程的基本原理提取了MCU串行通信编程的基本要素,把编程要素分为通用部分和个性部分。对于通用部分,给出了能够适用于各种MCU的串行通信程序,对于个性部分,给出了基本编程原理与移植要点。文中给出的设计方法和程序,分别在8位、16位、32位MCU上进行了测试,可以成为嵌入式开发中的一个通用部件。
|
| 关 键 词： | 嵌入式系统 通用串行通信程序 设计方法 软件工程 |
| 文章编号： | 1007-757X（2006）09-0018-04 |
| 收稿时间： | 2005-12-19 |
| 修稿时间： | 2005-12-19 |
Design Method of Universal Program about Serial Communication in Embedded Application |
| |
| WANG Yang-chun,Wang Yi-huai. Design Method of Universal Program about Serial Communication in Embedded Application[J]. Microcomputer Applications, 2006, 22(9): 18-21 |
| |
| Authors: | WANG Yang-chun Wang Yi-huai |
| |
| Abstract: | The commonness of serial communication for various MCUs in embedded application is analyzed.Based on the princi- ples of software engineering,the basic programming factors about serial communication are picked up,which include universal part and individual part.For the universal part,the serial communication program for various MCUs is provided,and for the in- dividual part,both basic programming principles and grafted points are presented.The design methodes and programs in this pa- per have been tested on 8-hit,16-bit ,and 32-bit MCUs ,which can be a universal component in embedded application. |
| |
| Keywords: | Embedded system Universal serial communication program Design method Software engineering |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
