| 反应离子束刻蚀应用于光刻胶灰化技术研究 |
| |
| 引用本文： | 王旭迪,刘颖,洪义麟,徐向东,付绍军. 反应离子束刻蚀应用于光刻胶灰化技术研究[J]. 微细加工技术, 2004, 0(2): 23-26 |
| |
| 作者姓名： | 王旭迪 刘颖 洪义麟 徐向东 付绍军 |
| |
| 作者单位： | 1. 中国科学技术大学,国家同步辐射实验室,合肥,230026;合肥工业大学,机械与汽车工程学院,合肥,230009
2. 中国科学技术大学,国家同步辐射实验室,合肥,230026 |
| |
| 基金项目： | 国家863-804主题专项资助项目(863-804-9-2) |
| |
| 摘 要： | 以AZl500光刻胶为例，将氧气作为工作气体的反应离子束刻蚀工艺用于光刻胶图形的灰化处理，以去除经紫外曝光-显影后光栅中的残余光刻胶。研究结果表明灰化速率有随束流密度呈线性增加的趋势。经过反应离子束刻蚀后，光栅槽底残余光刻胶被去除干净，同时线条的宽度变细，在一定程度上达到修正光刻胶光栅线条占空比的目的。用原子力显微镜检测，无光刻胶的K9基片表面在灰化工艺前后其粗糙度无明显变化。该工艺具有良好的可控性，解决了在厚基片上制作大口径衍射光学元件时残余光刻胶的去除问题。
|
| 关 键 词： | 反应离子束刻蚀 光刻胶灰化 灰化速率 占空比 衍射光学元件 |
| 文章编号： | 1003-8213(2004)02-0023-04 |
| 修稿时间： | 2003-12-29 |
Reactive Ion Beam Etching Applied to Photoresist Ashing |
| |
| WANG Xu-di. Reactive Ion Beam Etching Applied to Photoresist Ashing[J]. Microfabrication Technology, 2004, 0(2): 23-26 |
| |
| Authors: | WANG Xu-di |
| |
| Affiliation: | WANG Xu-di~ |
| |
| Abstract: | Reactive ion beam etching in oxygen plasma was applied to AZ1500 photoresist ashing so as to remove the remained photoresist after exposure and development.The results show that the ashing rate increases linearly with the ion beam density.The ashing process not only removed the remained photoresist in the goove,but also corrected the duty cycle of the grating obviously.The surface morphology of the K9 glass substrate was examined by the atomic force microscopy and showed little difference in RMS roughness before and after ashing.The process was controllable and could be applied to strip the photoresist residual of diffractive optical element fabricated on the thick substrate. |
| |
| Keywords: | reactive ion beam etching(RIBE) photoresist ashing ashing rate duty cycle diffractive optical element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
