Thickness dependence of structural and optical properties of indium tin oxide nanofiber thin films prepared by electron beam evaporation onto quartz substrates

Indium tin oxide (ITO) thin films, produced by electron beam evaporation technique onto quartz substrates maintained at room temperature, are grown as nanofibers. The dependence of structural and optical properties of ITO thin films on the film thickness (99-662 nm) has been reported. The crystal structure and morphology of the films are investigated by X-ray diffraction and scanning electron microscope techniques, respectively. The particle size is found to increase with increasing film thickness without changing the preferred orientation along (2 2 2) direction. The optical properties of the films are investigated in terms of the measurements of the transmittance and reflectance determined at the normal incidence of the light in the wavelength range (250-2500 nm). The absorption coefficient and refractive index are calculated and the related optical parameters are evaluated. The optical band gap is found to decrease with the increase of the film thickness, whereas the refractive index is found to increase. The optical dielectric constant and the ratio of the free carrier concentration to its effective mass are estimated for the films.