首页 | 本学科首页   官方微博 | 高级检索  
     

不同絮凝剂的除磷效果研究
引用本文:梁海峰,王三反. 不同絮凝剂的除磷效果研究[J]. 广东化工, 2010, 37(8): 94-96
作者姓名:梁海峰  王三反
作者单位:兰州交通大学,环境与市政工程学院,甘肃,兰州,730070
摘    要:在室温条件下,利用常见的三种絮凝剂(PAC、FeCl3、Al2(SO4)3)对人工配置的含磷废水进行混凝处理,寻找对应最佳处理效果的投药量和pH。结果表明,Al2(SO4)3的最佳投药量为60 mg/L,最佳pH为7.0;FeCl3的最佳投药量为40 mg/L,最佳pH为10.05;PAC投药量为120 mg/L,最佳pH为8.0。

关 键 词:含磷废水  混凝剂  除磷  最佳条件

Research on the Coagulant for Phosphorus Removal
Liang Haifeng,Wang Sanfan. Research on the Coagulant for Phosphorus Removal[J]. Guangdong Chemical Industry, 2010, 37(8): 94-96
Authors:Liang Haifeng  Wang Sanfan
Affiliation:(School of Environmental & Municipal Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China)
Abstract:At room temperature conditions,using a common three kinds of coagulants(PAC,FeCl3,Al2(SO4)3) to configured phosphorus wastewater coagulation manually,found the best treatment effect corresponds to the dosage and the pH.The results showed that the optimum dosage and pH of Al2(SO4)3 were 60 mg/L and 7.0;The optimum dosage and pH of FeCl3 were 40 mg/L and 10.05;The optimum dosage and pH of PAC were 120 mg/L and 8.0.
Keywords:phosphorus wastewater  coagulation  phosphorus  optimum conditions
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号